**Samsung 12.5" laptop schematic possible??**

H

[H]ealer

Weaksauce
Joined
Sep 13, 2006
Messages
108
I just bought a Samsung laptop. I would like to rip out the crappy 5400 rpm harddrive and put in a decent ssd to give this machine some kick, improve battery life ect. There is no removable cover to access the drive from the bottom so it's gonna get a little tricky. Before I start prying up the keyboard and guessing if I've removed all the screws I'd like to look at a schematic. I've googled the hell out of this and can't find anything.

Can someone step up and help me on this one? Thanks...:D

Here is the machine..

http://www.microcenter.com/single_product_results.phtml?product_id=0375156
 
I know that there has to be schematic documents for this laptop. I just don't seem to be able to track them down...help:eek:
 
This isn't the same laptop, but it may help anyway:

http://wlbloguno.blogspot.com/2011/08/samsung-princeton-notebook-116-np300u1a.html

Edit: this might help more--

"I bought this laptop a week ago to replace an MSI GE620 which is a terrible laptop. So far I love this laptop. I arranged for a Plextor 128gb SSD to show up the same day as the laptop. The first thing I did was to remove the bottom of the laptop and replace the HDD. This was a little more complicated than other laptops I have had in the past. The bottom of the laptop is one piece and has no access panels to the various parts inside therefore in order to access the ram or HDD you must remove the whole bottom cover. There are a few screws to remove which are easily visible, and then there are two additional screws under the back rubber feet. The feet are attached with adhesive and stick pretty well. Even after I was done, the adhesive was sticky enough to replace the feet and no additional adhesive was required."
--http://www.amazon.com/review/R1W19LKBP2NHLX

PICS ALSO: http://forum.notebookreview.com/samsung/632172-samsung-3-series-np350u2b-12-5-a.html
 
You must log in or register to reply here.
Back
Top