This log is for user who prior Silent to Gaming spec (I don't play 3D games)
This is my modding log that cant be finished without any metal plate cutting.
Anyone will be able to do.
Sound interception sheet
It has function what decrease sound transmition , and control Coincidence Effect.
After placing this sheet, those metal part become like P180's side panel.(if you tap P180's side panel you can hear nealy sound.)
This sheet is fairly heavy(2.0kg/m2). The whole roll is 20kg. This weigh also contribute to decrease vibration noise. Most part , I use those double layerd for more sound damping.
FDD and Opt Drive.
Bottom sheet - 2 pieces , double layer
Top - cut one piece , double layer
Bottom-Front - 4piece , double layered
Bay area - double layered. Fortunately It makes proper airflow.
Partition - one pince , double layered. Cut cable slit.
HD Box - 2HD in HD silencer fixed with mounter.
Gel insulatered - this gel's proper use is for eathquake shock absorber for furniture or electronics. It is around $1.3.
Bay cover - Double layered
12cmFAN's anti-vibration part
Passive cooled heatsink. Thanks to this rear duct air flow , this PSU doesn't begin to spin its fan.(I set dial to spin when over 50C-) It is working fanless mode.
PSU heatsink - PSU heatsink cooled passively by rear fan duct
Inside the case
Blue mesh
Temperature & Specification
NB temp 45C~ 50C-, Room temp:around 30C- , CPU temp:around 45C- ~ 50C-. HD temp:40C- ~ 45C-.
Front and rear fans are installed. Front:600rpm , Rear:900rpm.
CPU:Athlon 3000+ (QQ on)
Cooler:Ninja + -changed
MB:K8N Diamond
NB cooler:Thermalright HR-05
Mem:Sanmax 512MB x2
HD:ST3250823AS x2
Silencer Box:HD-silencer Rev.2
VGA:Radeon X600XT
CoolerEEPCOOL VGA Heatpipe Cooler -changed
PSU:Scythe Stealth Power.
CaseC-V1000 plus
Front fan:Turbine 1000(controled 400rpm - 600rpm)
Rear fan:Scythe DFS122512LS(controled 900rpm)
This is my modding log that cant be finished without any metal plate cutting.
Anyone will be able to do.
Sound interception sheet
It has function what decrease sound transmition , and control Coincidence Effect.
After placing this sheet, those metal part become like P180's side panel.(if you tap P180's side panel you can hear nealy sound.)
This sheet is fairly heavy(2.0kg/m2). The whole roll is 20kg. This weigh also contribute to decrease vibration noise. Most part , I use those double layerd for more sound damping.
FDD and Opt Drive.
Bottom sheet - 2 pieces , double layer
Top - cut one piece , double layer
Bottom-Front - 4piece , double layered
Bay area - double layered. Fortunately It makes proper airflow.
Partition - one pince , double layered. Cut cable slit.
HD Box - 2HD in HD silencer fixed with mounter.
Gel insulatered - this gel's proper use is for eathquake shock absorber for furniture or electronics. It is around $1.3.
Bay cover - Double layered
12cmFAN's anti-vibration part
Passive cooled heatsink. Thanks to this rear duct air flow , this PSU doesn't begin to spin its fan.(I set dial to spin when over 50C-) It is working fanless mode.
PSU heatsink - PSU heatsink cooled passively by rear fan duct
Inside the case
Blue mesh
Temperature & Specification
NB temp 45C~ 50C-, Room temp:around 30C- , CPU temp:around 45C- ~ 50C-. HD temp:40C- ~ 45C-.
Front and rear fans are installed. Front:600rpm , Rear:900rpm.
CPU:Athlon 3000+ (QQ on)
Cooler:Ninja + -changed
MB:K8N Diamond
NB cooler:Thermalright HR-05
Mem:Sanmax 512MB x2
HD:ST3250823AS x2
Silencer Box:HD-silencer Rev.2
VGA:Radeon X600XT
CoolerEEPCOOL VGA Heatpipe Cooler -changed
PSU:Scythe Stealth Power.
CaseC-V1000 plus
Front fan:Turbine 1000(controled 400rpm - 600rpm)
Rear fan:Scythe DFS122512LS(controled 900rpm)