The Official Core 2 OverClocking Database *READ 1st Post for Instructions*

videomasterz said:
rls669 (nice OC of Q6600, please double check bios revision its not 6.00PG you are giving me the phenix, also I ASSUMED you have the Abit IP35 Pro board),
Click to expand...

Oops, sorry about that. BIOS ID is 12 (full version name is m630A12 I believe), and it's the non-pro IP35.
 
My X38-DQ6 should be here tomorrow and I will have my rig up and running for the weekend and I will re-do my top run with my Q6000. I have confidence that I will get quite abit more out of the chip :)
 
User Name: rahavsmt
Stability: 12hours+ Small FFTs Prime95 25.4

CPU: Q6600
OC: (Example: 3501MHz)
Stepping: G0
Week: L724
Code: A828
Vcore: BIOS 1.3875 Load 1.392

Cooling: Air
Cooler brand/model: Thermalright 120 Ultra Extreme with 2x Papst 4412 FGL (push-pull) and Arctic Cooling MX-2

Motherboard: Asus P5K
Bios Version: 0603
Operating System: Vista Business x64

RAM brand: MDT
RAM rated speed: 6400
RAM actual speed: 389
Latency: 5-5-5-15



 
UPDATE

Added: rahavsmt (good oc of Q6600, assumed mobo is Asus P5k-E)

Deleted: none

Editted: BUS@THAILAND (added bios version to E6420 entry), rls669 (added bios entry to Q6600 entry, also changed mobo from Abit IP35 pro to Abit IP 35)

First post of thread reflects current changes. Please REFRESH! (database and summary image will change)
 
OOZISH
PRIME 95 BLEND; SUPER PI 32MB 4 INSTANCE RUN

CPU: Q6600
OVERCLOCK: 3.402MHZ
STEPPING: 6 G0

WEEK: L723
CODE: A964
VCORE: 1.39 in bios

COOLING: thermaltake ultima-90 push 120mm noctua; pull 92mm Silverstone
**Antec p180 case; blowhole fan on low blowing DOWN on mosfets on low.

MOTHERBOARD: Abit IP35-Pro
BIOS: 11
OPERATING SYSTEM: VISTA PREMIUM 32bit

RAM: DDR2 3 GIGS
2 Gig Gskill F2-6400 PHU1-1GBHZ

RATED SPEED: 6400/800
ACTUAL SPEED: @ 906 MHz
LATENCY: 4-4-4-12

====================
EDIT:

Since this post I've worked on getting 4-4-4-12 mem settings stable. Couldn't do it with 3gb ram (mixed sticks) so I took out the 2 512's of corsair and just used the gskill. Below is my 4 hours of prime 95 stable screenie using the tighter timings. Since 3gb vs 2gb is negligible performance difference in a 32 bit os I've decided to make this my official system settings and my FIRST submission (as I think the cpu could go higher):



Here is the link to my cpu-z Validation file:

Validation with tighter timings
 
I went out and got a Asus P5K Deluxe Edition (P35 chipset)...I'm clocking better on it than I was on my 680i, I've got 3.4 going strong so far and I'm shooting for 3.5 today.
 
nice jimbean21 !!! I think im gonna upgrade my cpu to the e6750 later on..... and oc that cpu .. im sure itll give off less heat than my current e6600...
 
HAHA AWESOME. Told you I was coming for you Vexeus! I'm close now aren't I? :) another 300 or so Mhz and you're mine!

3534 Mhz is STABLE!

I'll post all the details a little later...gotta go to work.

That means this board does 500+ FSB without even trying, and I went ahead and set it to 525 for 3675 Mhz and am running the test now, who knows.. I may get 100% OC out of this thing!

Hell I'm close already!
 
3.6 is looking good too so far....I don't think this is going to be my 24/7 clock though, it's running damn hot...even on water. It's taking 1.525 vcore to get 3.6...PLL Voltage is 1.8 and North/SouthBridge voltages are maxxed too..wondering why asus didn't include any fans for the NB...The proc hasn't hit 74C yet or started throttling so I think I'm safe, plus the AS5 on it is practically brand new, heh...just applied it all and built it last night.
 
jimbean21 said:
3.6 is looking good too so far....I don't think this is going to be my 24/7 clock though, it's running damn hot...even on water. It's taking 1.525 vcore to get 3.6...PLL Voltage is 1.8 and North/SouthBridge voltages are maxxed too..wondering why asus didn't include any fans for the NB...The proc hasn't hit 74C yet or started throttling so I think I'm safe, plus the AS5 on it is practically brand new, heh...just applied it all and built it last night.
Click to expand...

I get scared anything over 71 C via coretemp...
 
HAHA 11 hours ORTHOS STABLE!!

Posting info shortly... around 68C temps stabilized...may try and bring down the vcore a bit and see if that helps and remains stable.
 
User Name: jimbean21
Stability: 11 hours 35 minutes 55 seconds Small FFT Orthos

CPU: E6300
OC: 3605 Mhz
Stepping: 6 B2
Week: L629
Code: B084
Vcore: 1.525 BIOS - 1.5 Lavalys

Cooling: Water
Cooler brand/model: Thermaltake Symphony Mini

Motherboard: Asus P5K Deluxe
Bios Version: 0404
Operating System: XP 32

RAM brand: OCZ Technology
RAM rated speed: 1066 This board makes me run 1:1, damn it :(
RAM actual speed: 1030
Latency: 5-5-5-15 @ 2T

Screenshots of Orthos & Intel TAT:



CPU-Z Validation Link:

http://valid.x86-secret.com/show_oc.php?id=250281
 
Thanks!

I'm pushing for 3.7, maybe 3.8 when I get back from Buffalo.
 
LOL

Looking to be beaten Vexeus? :)

I somehow doubt that I'll be able to surpass you, but I should be able to get DAMN close...my temps are already kinda high, I am wondering if this chip even has a wall for me to hit, heh. I'm very pleased with this motherboard though, 515 FSB and counting!


Believe me though, I really wanna pwn your ass Vexeus :p lol.
 
User Name: Mr. Scarface
Stability: 8 hours Prime95 Small FFTs

CPU: Q6600
OC: 3510 Mhz
Stepping: B G0
Week: L723
Code: A677
Vcore: 1.4625V

Cooling: Air
Cooler brand/model: Thermalright Ultra 120 Extreme

Motherboard: Gigabyte P35-DSR3 (Rev. 1.0)
Bios Version: F5
Operating System: Vista 64

RAM brand: G.SKILL
RAM rated speed: PC6400 (DDR2 800)
RAM actual speed: 936 Mhz
Latency: 6-7-7-20

screenfinal-1.jpg


http://valid.x86-secret.com/show_oc.php?id=250739
 
UPDATE

Added: OOZISH (nice OC good you just left the G.Skill in there), jimbean21 (3rd entry, of E6300 im impressed of your speed now! pretty good!), Mr. Scarface (good oc of Q6600 assumed you have DS3R NOT DSR3)

Deleted: none

Editted: none

First post of thread reflects current changes. Please REFRESH! (database and summary image will change)
 
I got myself some killer DDR2, OCZ2N1066 PC8500, I have it running 5-5-5-15 overclocked at 567mhz; I think I might even get CAS 4 with this at this speed, but I'm not ready to start testing for that. Warrantable memory up to 2.4volts! I have mine at 2.2--the rest of my setup is identical.

TURNED OUT I HAD A BAD STICK OF GSKILL (part of the problems I was having getting over 4 hours stable with that last setup, even though it pulled it off. I think eventually the testing got to the stick becvause after a while I couldn't get into windows with it).



validation is CPU-Z VALIDATION

wow, check it:

 
I see no E6850 love. :(

Running mine through it's paces with the Intel stock heatsink. I need something better desperately. (Stable with all the games, but had to stop it with Orthos after not even 7 and a half minutes as the temperature was 70 C and climbing. :eek: )


Anyways, one for the unstable list on the currently nonexistent E6850 list. :D

User Name: JinxCA
Stability: 7 minutes, 24 seconds Orthos small FFT XD

CPU: E6850
OC: 3701.5 Mhz
Stepping: B G0
Week: L719
Code: B095
Vcore: 1.375 in bios

Cooling: Old School Air Cooled
Cooler brand/model: Intel Stock

Motherboard: eVGA 680i NF68-A1
Bios Version: P31
Operating System: XP Pro 32

RAM brand: OCZ
RAM rated speed: 6400
RAM actual speed: 411.3 Mhz
Latency: 5-5-5-16

Truly an awesome processor. Ran it at 4Ghz for e-peen enhancement earlier at 1.55 in bios (1.51 actual) and was solid. System shutdown as it reached 73 C of course, but prior it was great. :D

Probably going water now, lol. Does anyone know if not having a shroud on a rad will severely affect temperatures? I want to keep it all internal but the top fans on my 190 are 140mm, so if I just sorta hung a 2x120mm rad would it work just as well or near as good as with a shroud and two 120mm fans?
 
User Name: mle
Stability: 4hours+ Prime95)

CPU: 6750
OC: 3232
Week: L726
Code: A903
Vcore: 1.35 (bios)

Cooling: Intel stock
Motherboard: P3-DS3R F4
Operating System: XP

RAM brand: Crucial Ballistics
RAM rated speed: 6400
RAM actual speed: 403
Latency: (Example: 5-5-5-15)

14281428ds2.jpg
[/URL][/IMG]

[URL=http://imageshack.us][/URL]
 
rahavsmt said:
User Name: rahavsmt
Stability: 12hours+ Small FFTs Prime95 25.4

CPU: Q6600
OC: (Example: 3501MHz)
Stepping: G0
Week: L724
Code: A828
Vcore: BIOS 1.3875 Load 1.392

Cooling: Air
Cooler brand/model: Thermalright 120 Ultra Extreme with 2x Papst 4412 FGL (push-pull) and Arctic Cooling MX-2

Motherboard: Asus P5K
Bios Version: 0603
Operating System: Vista Business x64

RAM brand: MDT
RAM rated speed: 6400
RAM actual speed: 389
Latency: 5-5-5-15
Click to expand...


Congrats....Now what was that from AMD about Intel quads not overclocking well !!?! :rolleyes: :p :D
 
Please add

user name: spydermark
Stability: 11 plus hours small fft's prime

CPU:Q6600
OC: 3609 MHz
Stepping: (G0
Week: L721
Code: A814
Vcore: 1.525

Cooling: Water
Cooler brand/model: swiftech

Motherboard: ABIT IP35 PRO
Bios Version: 14
Operating System: Vista 32

RAM brand: Corsair
RAM rated speed: 8500
RAM actual speed: 802
Latency: 5-5-5-15
http://img227.imageshack.us/my.php?image=36ty1.jpg
 
User Name: Synxll
Stability: 6hours+ Small FFTs orthos

CPU: e4300
OC: 3472 MHz
Stepping: L2 (On cpu-z said Stepping 2, revision L2, so i put L2 :confused:)
Week: Q644
Code: A739
Vcore: 1.464v

Cooling: Air
Cooler brand/model: Thermaltake BigTyp VX

Motherboard: MSI P6N SLI-FI
Bios Version: 2.12
Operating System: XP 32

RAM brand: OCZ
RAM rated speed: 6400
RAM actual speed: 890
Latency: 4-3-3-12-12-2T

Validation: http://valid.x86-secret.com/show_oc.php?id=255668
 
User Name: thorYorak
Stability: 13hours+ Small FFTs orthos

CPU: E6750
OC: 3520Mhz
Stepping: B G0
Week: L725
Code: A615
Vcore: Set to 1.46250V in Bios but CPU-Z reads 1.424V idle and sags to 1.392V under full load

Cooling: Air
Cooler brand/model: Intel Stock

Motherboard: Gigabyte P35-DS3R Rev 1.0
Bios Version: F6
Operating System: XP32

RAM brand: Crucial
RAM rated speed: 8500 (CPU-Z misreports as 6400)
RAM actual speed: 1056Mhz
Latency: 5-7-7-24 during the burn-in, but I later set it to 5-5-5-15 and haven't had any problems with the Orthos blend test

This is all in an Antec Sonata III case with the 120mm exhaust fan set on medium.

http://valid.x86-secret.com/show_oc.php?id=255182
 
User Name: Sithboy1138
Stability: 8.5 hours Orthos

CPU: E6600
OC: 3201 Mhz
Stepping: 6 2B
Week: 3717
Code: A864
Vcore: 1.368V

Cooling: Air
Cooler brand/model: Stock

Motherboard: MSI P6N SLI-FI
Bios Version: V2.3
Operating System: Vista 32

RAM brand: SUPER TALENT
RAM rated speed: PC2 6400 (DDR2 800)
RAM actual speed: 800.6 Mhz
Latency: 5-6-6-15


Screen of Orthos
CPU-Z Validator Database
 
UPDATE

Added: JinxCA (Top E6850 for unstable list), mle (i think mobo is P35 right not just P3 ?, good oc), thorYorak (nice oc of e6750, just used your 5-5-5-15), Sithboy1138 (decent oc of E6600 on intel stock)

Deleted: none

Editted: spydermark (higher oc of Q6600 good job!)

First post of thread reflects current changes. Please REFRESH! (database and summary image will change)
 
videomasterz said:
UPDATE

Added: JinxCA (Top E6850 for unstable list), mle (i think mobo is P35 right not just P3 ?, good oc), thorYorak (nice oc of e6750, just used your 5-5-5-15), Sithboy1138 (decent oc of E6600 on intel stock)

Deleted: none

Editted: spydermark (higher oc of Q6600 good job!)

First post of thread reflects current changes. Please REFRESH! (database and summary image will change)
Click to expand...

Thanks for the actualization!!! :D:D:D
 
synxll said:
Thanks for the actualization!!! :D:D:D
Click to expand...

sorry i didnt list you in the update thraed, but your entry is there in the database let me edit it:

UPDATE

Added: JinxCA (Top E6850 for unstable list), mle (i think mobo is P35 right not just P3 ?, good oc), thorYorak (nice oc of e6750, just used your 5-5-5-15), Sithboy1138 (decent oc of E6600 on intel stock), Synxll (3rd highest E4300, sorry for not listed you here, i sometimes get confused at times)

Deleted: none

Editted: spydermark (higher oc of Q6600 good job!)

First post of thread reflects current changes. Please REFRESH! (database and summary image will change)
 
User Name: Anchen
Stability: 13 hours Orthos Small FFTs

CPU: Q6600
OC: 3402 Mhz
Stepping: B G0
Week: L724
Code: A828
Vcore: 1.425V

Cooling: Air
Cooler brand/model: Thermalright Ultra 120 Extreme

Motherboard: Asus P5K-Deluxe
Bios Version: 0601
Operating System: Vista 64 (Home Premium)

RAM brand: G.SKILL
RAM rated speed: PC6400 (DDR2 800)
RAM actual speed: 756 Mhz
Latency: 5-5-5-13

I think my chip can get higher than this but need to work on it a bit more. I'll update or resubmit if I do get something better.

overclock.jpg
 
Just a reminder I switched memory and you still have my gskill listed; I guess that's fine. I RMA'd that bad stick of gskill I had and already got it back; using both sticks in a different computer. I love gskill, but that memory can't run at 567 like the OCZ I have now. ;)

My info on the new memory is up a few threads. Either way it's no big deal. Great work here as always, videomasterz! :cool:
 
awesome job on the thread videomasterz. appreciate it.

hey i was wondering if you could change my entry. i listed the wrong ram specs. i thought you meant what they came clocked at lolol. looks like kind of dumb there like why isnt it 1:1 ratio :p

yeah but the correct info is 925mhz at 5-5-5-15.

thanks man.
 
oozish said:
Just a reminder I switched memory and you still have my gskill listed; I guess that's fine. I RMA'd that bad stick of gskill I had and already got it back; using both sticks in a different computer. I love gskill, but that memory can't run at 567 like the OCZ I have now. ;)

My info on the new memory is up a few threads. Either way it's no big deal. Great work here as always, videomasterz! :cool:
Click to expand...

ok will make note of that next time I update.... thanks!! for the complement :)



haadij404 said:
awesome job on the thread videomasterz. appreciate it.

hey i was wondering if you could change my entry. i listed the wrong ram specs. i thought you meant what they came clocked at lolol. looks like kind of dumb there like why isnt it 1:1 ratio

yeah but the correct info is 925mhz at 5-5-5-15.

thanks man.
Click to expand...

ok will make not of that as well :) glad users appreciate it.... getting a thermalright ultra 120 extreme in to OC my friends E6750 with his DS4 board will see what I can hit...
 
You must log in or register to reply here.
Back
Top