AceGoober
Live! Laug[H]! Overclock!
- Joined
- Jun 25, 2003
- Messages
- 25,665
Installed a brand new XFX 6970 2GB in rig-in-sig using Windows 7 Ultimate 64bit. Latest 11.2 AMD Catylist installed. Previous video card was a Palit GTX 460.
I've Googled for the last 90 minutes and haven't found a solution to my issue.
The max res the drivers will allow me to set is 1280 x 800. Any attempts to set a higher resolution results in a blank screen and the hard drive light blinking ever second or so.
Here is what I've done so far:
1. Uninstalled all nVidia drivers,
2. Ran Driver Sweeper to remove residual nVidia drivers and registry entries,
3. Shut down fully,
4. Unplugged power cord,
5. Pressed start button to dissipate any stored electricity,
6. Swapped cards while wearing a grounding bracelet,
7. Powered on system,
8. Booted into Windows at 800 x 600,
9. Installed ATI Catylist 11.2,
10. Rebooted,
11. System performs POST, shows startup, blanks with hard drive light blinking every second,
12. Reset,
13. Booted into Windows @ 640x480,
14. Reinstalled Catylist 11.2,
15. Rebooted,
16. Same issue as # 11,
17. Experimented with resolutions - unable to set higher than 1280 x 800.
I'm still searching for a solution but thought maybe someone here might know what the solution is.
Thanks in advance for any assistance.
I've Googled for the last 90 minutes and haven't found a solution to my issue.
The max res the drivers will allow me to set is 1280 x 800. Any attempts to set a higher resolution results in a blank screen and the hard drive light blinking ever second or so.
Here is what I've done so far:
1. Uninstalled all nVidia drivers,
2. Ran Driver Sweeper to remove residual nVidia drivers and registry entries,
3. Shut down fully,
4. Unplugged power cord,
5. Pressed start button to dissipate any stored electricity,
6. Swapped cards while wearing a grounding bracelet,
7. Powered on system,
8. Booted into Windows at 800 x 600,
9. Installed ATI Catylist 11.2,
10. Rebooted,
11. System performs POST, shows startup, blanks with hard drive light blinking every second,
12. Reset,
13. Booted into Windows @ 640x480,
14. Reinstalled Catylist 11.2,
15. Rebooted,
16. Same issue as # 11,
17. Experimented with resolutions - unable to set higher than 1280 x 800.
I'm still searching for a solution but thought maybe someone here might know what the solution is.
Thanks in advance for any assistance.
Last edited: