Wiring of a TJ09

[steveak]

Hi,

Getting ready for a first-time build, and have spent some time just looking at the various parts before I start attaching things.

The internal wiring coming off of the top of my TJ09 case contains several different wires, but I'm wondering about the Firewire wires in particular.

The Firewire cable itself is marked and I know where to place it, but it also has 7 single wires attached to it. I don't know what these are, or where they go.

I'll be using an IP35-Pro motherboard.

The wire coloring and labeling are these:

• Orange: TPA -
• Blue: TPA +
• Red: TPB -
• Green: TPB +
• White: VP
• Black: VG
• Black: Shield

The Silverstone manual is sadly lacking in detail, and the motherboard manual does not seem to identify similar wire connections. (The MB is still in the bag, as I'm not quite ready to start attaching things to it.)

So, do I need to plug these single wires anywhere, or do I just need to tape them up and ignore them?

Thanks!

Steve

 

[tmaxxking1]

these seem to be loose in case the fire wire pins are laid out different on your motherboard

* Orange: TPA -
* Blue: TPA +
* Red: TPB -
* Green: TPB +
* White: VP
* Black: VG
* Black: Shield

http://www.frontx.com/cpx506.html

 

[Darkstofknightz]

Yeah, Its in case you don't have the red fire wire connection on your MB, tape them up

 

[steveak]

these seem to be loose in case the fire wire pins are laid out different on your motherboard

* Orange: TPA -
* Blue: TPA +
* Red: TPB -
* Green: TPB +
* White: VP
* Black: VG
* Black: Shield

http://www.frontx.com/cpx506.html

Ah, very good then. Thanks for the info; that's just what I was needing to know!

steve