With the growing amount of modding work and "one off" custmer mods i finally decided to give the workshop a bit more of a "pro look"
The workshop looks well used and tired...
The first thing i really wanted to add was nice monitor setup! and not just one LCD... i wanted at least 2 ...even 3!
I decided on a wall mounted Tri-Mon setup! using just 3 15" LCD's
The LCD's were cracked out of the orig casings and layed on the workbench
The 3 x 15" LCD almost give a total screen length of 100cm
The new 40mm thich plex frame was measured and routed to form a channel for the LCD's to slot into.
To give the screen a "concave" look the top and botten frames are given 2 slight bends.
The so they would clamp togther and hole the 3 LCD's in the rounted channels the frames are drilled countersunk and bolted
togther using SS hex heads.
The Ends are glued into place and left to dry.
The workshop looks well used and tired...
The first thing i really wanted to add was nice monitor setup! and not just one LCD... i wanted at least 2 ...even 3!
I decided on a wall mounted Tri-Mon setup! using just 3 15" LCD's
The LCD's were cracked out of the orig casings and layed on the workbench
The 3 x 15" LCD almost give a total screen length of 100cm
The new 40mm thich plex frame was measured and routed to form a channel for the LCD's to slot into.
To give the screen a "concave" look the top and botten frames are given 2 slight bends.
The so they would clamp togther and hole the 3 LCD's in the rounted channels the frames are drilled countersunk and bolted
togther using SS hex heads.
The Ends are glued into place and left to dry.