WTB fan parts(3pin connector piece) dont care if fan is broke!!

[thrgk]

I am looking to buy the three pin connector piece on computer fans. I don't care about the fan at all just want about an inch of wire on the 3pin connector piece. let me know if anyone has them, good way to get rid of broken fans.

paying $.75 each connector.

thank you

 

[Thug Esquire]

Is that shipped?

 

[elyrly]

Same question as Thug Esquire

 

[dbwillis]

how many do you need?

 

[thrgk]

no id pay for shipping. how many ya got.


EDIT.
I'd love 15-20 of em

 

[toddm27]

you could always grab these and solder some wires to them, 15c each in quantities of 10+

http://www.mouser.com/ProductDetail...iG0C5h0BybjOXqLsXQ%2bGfjcarTOCSvErGSJN531ow==

edit - nvm those are the mb header side

 

[thrgk]

idk how to solder them, i have them now, frozen cpu ones with the prongs, but no idea if i solder then to the sloped part, or the flat part, and which part goes in first? the flat or the slope?

 

[toddm27]

well actually you could do these, just need to clip the wires
http://sidewindercomputers.com/pa3ta.html

 

[thrgk]

ah thank you, toddm27 they are female 3pin on each side correct?

 

[toddm27]

the one end is a panaflo connector, but it should be female yes

 

[thrgk]

so could i technically use both ends? or prolly not, was hoping to get a 3pin female to 3pin female adapter to be able to use both ends

 

[toddm27]

should be able to depending on the project, here's a better picture of one,
http://www.newegg.com/Product/Product.aspx?Item=N82E16800881088

 

[Gillbot]

If all you need is the female ends, LMK. I have a bunch you can crimp on with pliers. Metal inserts and the 3 pin plastic end.

Looks like this: http://www.xsfans.com/images/medium/0341_MED.jpg Comes with the metal ends that go in it, that's it.

 

[thrgk]

yes i have them as well, but not sure, on the metal inserts, does the sloped part go in first or the flat part? and do u solder the wire to the slope part or the flat part?

 

[toddm27]

you'd solder on the v shaped area, then crimp it, the triangle shaped part would go into the plug first

 

[thrgk]

ah ok, i will try some on my own.

Thanks alot! Can lock this thread up.