secure.boy
Limp Gawd
- Joined
- Oct 22, 2007
- Messages
- 474
When i write "sh runn" i don't get output from router:
router1#sh runn
router1#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-IK2S-M), Version 12.1(5)T, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Sat 11-Nov-00 03:57 by ccai
Image text-base: 0x60008950, data-base: 0x612A4000
ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (f
c1)
router1 uptime is 23 weeks, 4 hours, 50 minutes
System returned to ROM by reload at 16:32:34 UTC Mon Mar 1 1993
System restarted at 00:00:01 UTC Mon Mar 1 1993
System image file is "flash:c3640-ik2s-mz.121-5.T.bin"
cisco 3640 (R4700) processor (revision 0x00) with 58368K/7168K bytes of memory.
Processor board ID xxxxxxxx
R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
Channelized E1, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
Primary Rate ISDN software, Version 1.1.
2 Ethernet/IEEE 802.3 interface(s)
3 FastEthernet/IEEE 802.3 interface(s)
32 Serial network interface(s)
1 Channelized E1/PRI port(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
router1#
Any ideas what can cause this?
router1#sh runn
router1#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-IK2S-M), Version 12.1(5)T, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Sat 11-Nov-00 03:57 by ccai
Image text-base: 0x60008950, data-base: 0x612A4000
ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (f
c1)
router1 uptime is 23 weeks, 4 hours, 50 minutes
System returned to ROM by reload at 16:32:34 UTC Mon Mar 1 1993
System restarted at 00:00:01 UTC Mon Mar 1 1993
System image file is "flash:c3640-ik2s-mz.121-5.T.bin"
cisco 3640 (R4700) processor (revision 0x00) with 58368K/7168K bytes of memory.
Processor board ID xxxxxxxx
R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
Channelized E1, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
Primary Rate ISDN software, Version 1.1.
2 Ethernet/IEEE 802.3 interface(s)
3 FastEthernet/IEEE 802.3 interface(s)
32 Serial network interface(s)
1 Channelized E1/PRI port(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
router1#
Any ideas what can cause this?