Alaberti
Weaksauce
- Joined
- Jan 21, 2018
- Messages
- 85
Got my V2 yesterday and moved my hardware into it. I'm having a hell of a time fitting the AIO and EVGA 1080 Ti FTW3 in there. I can't close the CPU side panel because the mess of wires from the PSU have nowhere to go, specifically the huge ATX cable. There is no void space when the AIO is installed. Any tips on routing these? Are custom cables the answer?
I was having the same issue. Like sldr I picked up the Corsair cables eventually (which I'll be posting about later today), but I was also using the stock cables successfully with a 92mm fan grill installed over the noctua fan, then I routed the 2 PCI-E cables up the channel between the PSU and the motherboard, the 24-pin across the noctua and stuffing whatever excess into the space between the radiator and the front ssd panel, etc etc. Twisty ties or zip ties help a bit. You can see some layouts from prevous posts of mine and others, but it's fairly simple to manage all the cables except the 24-pin which requires a little more...attention than the others in my experience.
Edit: I'm late, I see you already found a solution!
Last edited: