Sonnyspoon
n00b
- Joined
- Apr 8, 2018
- Messages
- 6
Ok my psu is ko. I don’t have the 12v. The fan don’t turn.
I wait now the corsair 600w and i turn back the be quiet psu.
I wait now the corsair 600w and i turn back the be quiet psu.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
A switch like that will work either way, it justs connects / jumps the pins it is plugged onto.It's an issue with the power button, not the psu. You put the power sw cable in the wrong way, flip it around so the power sw text is facing the ram.
I cut the ones that came with using a dremel, you're after 18-20mm length screws.Can someone who has the Asetek 545 and a Noctua A9x14 recommend me some screws that work with the fan and res? Thanks in advance.
I cut the ones that came with using a dremel, you're after 18-20mm length screws.
Can someone who has the Asetek 545 and a Noctua A9x14 recommend me some screws that work with the fan and res? Thanks in advance.
Try jumping the motherboard manually with a screw driver. If it still doesn't start then its definitely not a power sw issue.
I doubt it's a psu issue because the leds are on, but you could try testing the psu by connecting a fan to it with molex and jumping the 24pin with a paperclip to see if the fan works.
I hope you got mine, i must have sent them 4 times lol.Matias Petersen I got the pictures
Hi everyone,
Long time lurker here in possession of the v2.
I still not sure still what right CPU and GPU for the config I'm trying to achieve, so I would be happy if you could help me with some of your experienced inputs
Pre-requirement: Corsair SF450
Main prio to achieve for this build: (first) low temps/ low noise and while trying to achieve performance (second).
- Intel Core i7 8700? i5 8600?
- Corsair SF450 (can the internal fan be changed to improve noise/temp levels?)
- Asus ROG Strix Z370-I Gaming or ASRock Fatal1ty Z370 Gaming-ITX/ac
- Cooltek LP53 + Noctua A9x14 or the Noctua Nh-L9i or Cryorig C7
- Corsair Vengeance LPX?
- Samsung 960 EVO?
- GPU no idea, 1070 may be but which specific model?
I am looking forward hearing from your inputs! and welcome to pm me thanks.
PS: I remember Dan posting those ready made setup - as guidance build suggestions - but cannot find those anymore.
Yes you're right but I do want to work with that requirement and see what can be achieve with less wattage.If you care about noise or cooling, you may not want to use the SF450, it would obviously work fine as the wattage requirement on CPU isn't too high, but a SF600 would give you some more breathing room I would imagine.
Not to disrupt the very interesting subject of new all CU coolers, but I've sent in my submission to the dan a4-sfx HoF some time ago, but gotten no confirmation on whether or not my pictures has made it into Dan's inbox. Should I send the pictures in again or is it completely normal to not get any response (even in form of an auto reply)[...]
Matias Petersen I got the pictures
I hope you got mine, i must have sent them 4 times lol.
Anyone tested the C7 cu already? There are so far 2 results which are contradicting so I'm holding myself off before pulling the trigger.
Gam
Anything from 8600k and above will run hot and needs delid to have better temps. Best is an 8400 or maybe even the 8500.
Edit:
Haven't plug in my 8600 yet since I'm waiting for my custom cables. I'll be using a sf450 aswell but with only a gtx 1060 6gb.
Anyone know where i can buy this mounting clips for the noctua fan to mount it on the Cryorig C7
View attachment 67666
View attachment 68358 View attachment 68357
Hi , my modification of fractal design t 12 with aluminium rad 30 mm and ek extender 8 mm , ek angle 90 .
https://fr.aliexpress.com/item/G1-4...g-Cooler-For-CPU-GPU-VGA-RAM/32743907811.html
Not finished to install . SoonWhats your temps ?
Can you explain why you would do that over just having an asetek 545lc?View attachment 68358 View attachment 68357
Hi , my modification of fractal design t 12 with aluminium rad 30 mm and ek extender 8 mm , ek angle 90 .
https://fr.aliexpress.com/item/G1-4...g-Cooler-For-CPU-GPU-VGA-RAM/32743907811.html
The right angle fittings makes me feels better than the forced turns for the tubing coming out of the Asetek 545 radiator.View attachment 68358 View attachment 68357
Hi , my modification of fractal design t 12 with aluminium rad 30 mm and ek extender 8 mm , ek angle 90 .
https://fr.aliexpress.com/item/G1-4...g-Cooler-For-CPU-GPU-VGA-RAM/32743907811.html
Fair enough!The right angle fittings makes me feels better than the forced turns for the tubing coming out of the Asetek 545 radiator.
i prefer this ,for the simple reason everything is demountable and alterable . Asetek is completely closed .
sadly my build won't be finished in time, but I guess you will get enough great pictures anyways ^^Hi like to remind everyone that are only 9 days left to be a part of the dan-cases hall of fame (hof).
Rules:
https://dan-cases.com/dana4_hof.html