mota
2[H]4U
- Joined
- Mar 8, 2000
- Messages
- 2,672
It has been almost 2 years since I upgraded my rig in any way since originally posting this. My water system has been running flawlessly since ironing out the problem with the cracking reservoirs caused by using hy-per lube.
Comp specs:
Chenming ATX 801-F file server case
Abit KX7333R
AMD XP1600+ OC'ed to 1.90 Ghz @ 1.91 volts
Geforce3 64 Mb
Adaptec 29320A U320 SCSI card
Fujitsu 73GB MAS3735NP U320 SCSI HD
IBM 18 GB SCSI HD
Plextor 12/10/32S SCSI CDRW
Chaintech AV-710 sound card
Cooling specs.
Block: Lytron CP20 with various TEC's or Danger Den maze1
Radiator: Lytron 6220 all copper heat exchanger
Pump: Iwaki MD20R 420 GPH
Reservoir: homemade 16oz lexan pos
Tubing: Tygon R-3603 3/8" ID and 1/2" ID from RES. to pump inlet.
Currently running without a peltier using Danger Den Maze1 block my temps are mid 30's celcius(according to MBM, we all know how reliable that is) at full load with an ambient temp of approximately 28 C.
I get below ambient temps with a 122 watt peltier and even better temps with a 156 watt but could not increase my OC with them so I'm not running TEC's ATM.
Please excuse the dead links..
Got a new Radiator
Comp specs:
Chenming ATX 801-F file server case
Abit KX7333R
AMD XP1600+ OC'ed to 1.90 Ghz @ 1.91 volts
Geforce3 64 Mb
Adaptec 29320A U320 SCSI card
Fujitsu 73GB MAS3735NP U320 SCSI HD
IBM 18 GB SCSI HD
Plextor 12/10/32S SCSI CDRW
Chaintech AV-710 sound card
Cooling specs.
Block: Lytron CP20 with various TEC's or Danger Den maze1
Radiator: Lytron 6220 all copper heat exchanger
Pump: Iwaki MD20R 420 GPH
Reservoir: homemade 16oz lexan pos
Tubing: Tygon R-3603 3/8" ID and 1/2" ID from RES. to pump inlet.
Currently running without a peltier using Danger Den Maze1 block my temps are mid 30's celcius(according to MBM, we all know how reliable that is) at full load with an ambient temp of approximately 28 C.
I get below ambient temps with a 122 watt peltier and even better temps with a 156 watt but could not increase my OC with them so I'm not running TEC's ATM.
Please excuse the dead links..
Got a new Radiator
Originally posted by mota on 06-22-2002
Its a Lytron 6220 to replace my 6120. I have alot of work to do before I'm ready to use it though. I need to find four 172mm fans, 2 for the rad. and 2 for the case. I'm in the process of getting some 213 CFM delta fans(EFB1512ME), this is the major thing stopping me because they have never been brought into the US before. Its probably going to take a month or so to get the fans. Need a better pump also, I'm looking at Iwaki pumps, probably getting an MD20 or an RD-30 24 volt pump.