![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
Master [H]
2[H]4U
- Joined
- Mar 17, 2003
- Messages
- 2,629
I have a project I'd like to do, but I don't want to do a lot of work for nothing.
Basically, I have an Ubuntu 14.04LTS box running the Gigabyte 1037U mITX motherboard with an integrated Celeron and NM70 chipset. I have a couple hard drives, a 4GB 1066 DDR3 Mushkin RAM, and an optical drive. Nothing extravagant, which is why I'd like to pull out the Corsair HX520 PSU I have in there and use an older Antec 330W unit. It's more suited for the Pentium 4 era with a 22A +12V rail and obviously, the additional power states aren't available (but neither are they on the 520).
Basically, I'm pretty sure the Antec unit has enough juice to pull off what I need as it has the 24-pin ATX connector and the +12V connector. I'm just bouncing it off some other people to see if I'm miscalculating before I go undoing my wiring job.
Basically, I have an Ubuntu 14.04LTS box running the Gigabyte 1037U mITX motherboard with an integrated Celeron and NM70 chipset. I have a couple hard drives, a 4GB 1066 DDR3 Mushkin RAM, and an optical drive. Nothing extravagant, which is why I'd like to pull out the Corsair HX520 PSU I have in there and use an older Antec 330W unit. It's more suited for the Pentium 4 era with a 22A +12V rail and obviously, the additional power states aren't available (but neither are they on the 520).
Basically, I'm pretty sure the Antec unit has enough juice to pull off what I need as it has the 24-pin ATX connector and the +12V connector. I'm just bouncing it off some other people to see if I'm miscalculating before I go undoing my wiring job.