Recent content by BoostFrenzy

  1. B

    High pitched noise from MSI 560ti under load

    Just built a 2500k conservatively @ 4.3ghz and I use atitool to "scan for artifacts" while running prime95 and 4 concurrent sessions of cpuburn to test stability. 450w PSU and from the wall under load it's consuming 325w, whenever the video card is loaded I hear some high pitched noise, it...
  2. B

    SB Overclocking results?

    i7-2600k/p8p67 LE how's prime95 in-place fft, 8 threads cpu-z 1.56.3 reports 1.264-1.272v, 4327mhz and load temps do not exceed 60c (coretemp 99.8) good conservative, stable, overclock?
  3. B

    2600k, stock cooler/paste temps?

    ordered a 212+ we'll give it a try, probably blow it upward towards the intake of the PSU 120mm fan, tried stock cooler and coolermaster "silent1156" both were well into the 90s at 4120mhz/1.264v
  4. B

    2600k, stock cooler/paste temps?

    212+ the best way to go? requires removing the board on a 1155 still?
  5. B

    2600k, stock cooler/paste temps?

    what cooler is relatively quiet and will keep it 80 or under @ 4.2ghz?
  6. B

    P8P67 LE doesn't post when power removed first time.

    update: only happens when i've manually selected 1600mhz for the DDR speed (it is 1600mhz ram but board detects it as 1333) sounds like a bios problem?
  7. B

    P8P67 LE doesn't post when power removed first time.

    When restoring power the first boot will not post, red light stays illuminated. Must turn power off with power button then turn back on where it posts no problem and runs stable. Is there a bios update for this board that fixes this?
  8. B

    2600k, stock cooler/paste temps?

    yeah case airflow is good, this is with prime95 on 8 threads 78-80c, more like low 30s idle
  9. B

    2600k, stock cooler/paste temps?

    @ stock freqency it'll hold 78-80c, ambient temp of 70f. Is this average? It runs fine simply upping the multiplier to 42 for 4200mhz, but temps start getting into the 90s so I assume an aftermarket cooler is REQUIRED for overclocking?
  10. B

    Cloning software better than ghost?

    does true image work outside the operating system? boots to live cd or something? never used it
  11. B

    Cloning software better than ghost?

    Still using ghost from a bootable USB drive to clone damaged hard drives, is there a better product these days that works outside the operating system to recover/clone drives?
  12. B

    E8400 system still a best buy for light to moderate internet use?

    I guess what I meant to say was I wanted AT LEAST e8400 performance, 4gb ram, 64bit Windows7 and a sizable HD. Went with E8400, 1tb black HD, 4gb ram, Intel 43GT mobo for $500 shipped
  13. B

    E8400 system still a best buy for light to moderate internet use?

    Building a box for my gf's parents, they'll just be using the web, itunes and other minor demand applications. They DO NOT need a dedicated video card. For under $500 i'm thinking an E8400, intel 43GT board, 4GB ram, WD 6400AAKS HD and an optical drive... seem like the most economical...
  14. B

    WD6400AAKS, best bang for buck performance?

    I'm running a IP35/e8400@4050mhz/4gb ram and switched my WD7500AAKS to a WD6400AAKS, hdtune puts the 7500 @ 75mb/sec avg while the 6400 does 88mb/sec with a better burst and latency, this is with vista 64bit and ahci intel matrix driver 8.2 is this *THE* fastest drive I can run single drive...
  15. B

    new WD6400AAKS in stock @ NE

    So these are a good bit quicker than my WD7500AAKS eh? I'm running the 750 on a IP35, Vista SP1, AHCI w/ latest matrix storage driver... HD TUNE results: min: 46.6 max: 96.4 avg: 73.9 access: 13.9 burst: 121 cpu: 4.4 ....and I thought these were king of SATA hill lol, worth...
Back
Top