Download the latest intelburn, id prefer intelburn.
Prime doesn't stress so much, try linx/intelburn with 3.5+ Gb RAM (given you have 4gb) on maximum.
I have silverstone FT02 and i have tried both stock and puch&pull setup and I got roughly the same temps but somewhat noisier with...
What cooler do you have?
And to anyone who thinks 20 runs of intelburn/LinX is enough is a fool.
you need at least 80 runs or more. i got errors after 40 runs.
Voted 4
The temps temps are NOT ok considering it's a single gpu.
If you're going to buy 480, you really need to take lifetime warranty, I don't care what nvidia says about it can withstand such a high temp, pure bullshit. 95c is not ok.
this thing really needs WC.
And it even more...
I went from H50 to NH-D14
Man..its like day and night.
I had 85c in linx with H50 (push&pull). With D14 I got 65c! And it even much quieter than H50.
idle temps went from 34 to 28c.
H50 is not bad, but if your into overclocking beyond 3.5 Ghz, H50 is not an option I would recommend.
two weeks after i got the board the thing starts to squeal, and no, it's not the PSU.
it feels like it's coming from the electrolytic capacitors.
the squealing appears linear when the cpu is in idle. when the cpu and the hdd are working the squeal is hacking.
if i somewhat press with my...
looks neat. :-)
one thing i hate about this chase is the back of it. its so damn small and crowdy. you really need to spread out the cables to make the surface even, so the lid doesn't bend when its attached.
if you have time and patience, you can accomplish this.
also the upper lid can...
295w for a single chip...madness!
I really don't need another space heater
4870x2 was a good damn space heater even when it consumed 270w. I have enough with space heater graphic cards.
295w for a single card...no
I have the same cpu speed clock, vcore and vtt and still get 84c as maximum temperature after 20 passes.
I have FT02 chase with two Noctua NF-S12B as push+pull for H50.
I'll probably grab Noctua NH-D14 and end this madness, forcing the fans to spin at their maximum rate didn't...
50c.. are you referring to daily usage or intelburn? Because I don't believe you are getting 50c in intelburn, unless you have some serious air coolers at their maximum speed and really low room temperature.
I see you are running 4ghz
what temp do you get when testing intelburn/linX ?
h50 above 3.5Ghz on my i5 is not that great, reaches 84c maximum on intelburn.