Hello!
Recently upgraded to a GTX 1080 and no longer need this card. It has worked absolutely wonderful for me at 1440p and I'm sure it still shines at 1080p. I am the 2nd owner of this card. Never had any issues with it nor has it been overclocked. Runs cool and silent. Comes in original box...
I have an EVGA GTX 780SC for sale. Card works great and is in excellent condition (purchased 2/2014). I am upgrading, thus have no use for this card. Will come in original box and most accessories.
http://www.amazon.com/EVGA-GeForce-GTX780-SuperClocked-03G-P4-2784-KR/dp/B00CUIVSNS
Asking $265...
For sale are my used i2500K + GA Z68x-ud3h. Had for about 2 years. Never had any issues with my setup. The i2500K was lightly overclocked before starting dental school at which point i returned it to stock (also was always <70 with a hyper 212 plus). NB -- GA z68 boards are known to suffer from...
Im curious how efficient/effective it is to use "auto" vcore voltage when OCing an i2500K? I left everything at default and upped the multiplier to 45. I prefer auto because of the benefits of low vcore whilst idling.
Vcore whilst running prime95 = 1.28 volts
Max temps ~63C
Is using "auto"...
Hey guys,
I just got my i-2500K with a gigabyte z68-UD3H motherbaord. Its seems as though every guide i look at recommends different settings to enable/disable?
-Can i leave power saving options on? I hear SB is supposed to work with those on
- CPU PLL (what exactly is it)
-Multi load...
Just upgraded my computer as a gift to myself, however, i now have a second computer that is sitting around collecting dust! All prices negotiable (to be fair i didnt know how to price them)
Parts:
CPU: E8400 ( C0 stepping 6). Great Chip that i took up to 3.8Ghz, but then backed down to...
Freq: 3.9GHz
Vcc: 1.384 -->1.360 load
Temps: ~40 idle --> 57 load
FSB: 432
Mem: 400(unlinked and manually set. A problem?)
SPP: 1.45
MCP: 1.50
FSB VTT: 1.30
HT SPP MCP: 1.20
How safe is this overclock for 24/7 use? Are the core voltages too high?
Also, my Vdrop is kinda high! I have my VCC...
Hey guys,
I recently decided to re-overclock my system after having returned to stock speeds for an extended period of time.
My question is whether there is any performance degradation associated with running the FSB and DRAM at different frequencies, i.e i want to OC my e8400 to 3.7GHz...
eVGA 780i
2x eVGA 260
PCP&C 750W
4gb Gskill 8500
Vista 64bit
e8400
Last night, i came ho,em and my computer, which was on, wouldnt resume from sleep mode. I pressed restart and the monitor turned on and showed that my system had hanged. When i restartd my computer it would post. It...
I just got my 2 eVGA GTX 260 SC cards today (coming from 2 9800GTX). My 3DMark06 score hasnt changed at all, its still around 17300.
http://service.futuremark.com/home.action;jsessionid=533FFDB0977F478DA871A6CA086FBACA
I feel as though i should be scoring MUCH higher with these cards...
I am going to be creating a custom LED fixture so that i can light up the inside of my case. I will be using 5mm blue LEDS, however, i have never done something like this and am curious how to power the LEDS as well as how many i can use without sacrificing brightness. Also what are the...
Im trully considering stepping up form my 9800GTX KOs to 2 260s, which would only cost me abotu 180 bucks, however, i dont know if my PSU is up to it.
My current system:
PCPC 750W silencer 60A line
E8400 @ 3.92 GHz 1.38idle/1.345Vload
eVGA 780i @ 436 FSB
2 evga 9800GTX KO @...
Im currently running my CPU at 1.360 volts for 3.9GHz on my 780i. Is that safe? I know the max safe vid is 1.3625, but will running it at 1.360 do anything catastrophic?
I just switched cases to an Antec 900 thus i removed my heatsnik (xigmatek s1283?). My idle temps with my E8400 at 3.8 GHz 1.352V are 33/36. What baffles me is that Core 1 never changes temp while in idle: stays at 36. whereas my other core seems to flucuate. When i load prime 95 up, both cores...
So im getting to the point where i dotn know whether or not its worth it to keep ocing.
I have my E8400 Oced to 3.8GHz on my eVGA 780i
Specs:
VCC: 1.326 idle, 1.304 load
FSB: 423
VTT: 1.3
SPP: 1.450
Ram: 507.7
Temps: 37/38 Idle ~52/51 load
Now i dont know if it is worth it to run...
Hey,
I recentley bought an AMD 3800+X2 to replace my 3700+ sandiego because of the monster price cuts. My question is that, since this is my first time with a dual core i dont know the temp range for this chip on stock settings. I need to know this because i either need to reset my HS or i'll...
I have recently upgraded my monitor to a 21'' widescreen gateway, so i no longer need my Sony. It is a Sony SDM-HS93, which is about 3 years old. It is is PERFECT condition. It has 0 dead pixels. It has an analog input, and a 25ms response time. I play a lot of games and for analog, it doesnt...
WEll, ive had my new card(RMAed), 7900GTX, which is boinked also. Exhibits the same problems as the other one except the artifacts are a little different. I checked my volts, fine, and i checked my temps, fine again. It crashes in 3dMark 06 still, i have to hard re boot to get the system back...
I swear my GTX refuses to give its full power sometimes. I was running RTHDRBL and i had full screen rendering and max everything and my frames per second were 17-19 and my temps did not raised above 54, which was wierd because it seemed as though it wasnt giving off its horse power. I restart...
I am going to be upgrading to a 7900GTX so i will have no use for this card. In fact it will help fund my purchase. I bought it back in january, right after christamas( i had cash). Anways it is in complete working condition, 4 months use and not one problem, will come with all retail packaging...
Would like to buy an eVGA 7800GT CO (470/1100). Which is the N17 model i believe. Price isnt a problem. Below 260 for a use one is what im looking for.
I am unpgrading to a X-Fi so i will have no need for my Audigy 2 ZS. It is a great GREAT card in almost perfect condtion. The sound quality of this thing is amazing. The 3 sets of CMSS really make the music crystal clear.
$50 + shipping
Hi, i am having this wierd and serious problem, my "system" prcoess causes my CPU usage to jump from any where to 50-90% utilization, causing my computer to stop or hand. It also causes all my sound to dissappear saying that my direct sound source is not working. I just did a format and this...
Hi, i will be upgrading my monitor, so i will have no need for this one. It is a Sony SDM-HS93, which is about 2-3 years old. It is is PERFECT condition. It has 0 dead pixels and no backlight bleeding. It has an analog input, and a 25ms response time. I play a lot of games and for analog, it...
About a 3 year old monitor. Geart condition no dead pixels. Analog, 25ms, 700:1 contrast ratio. Just wondering what the price would be( not expecting much)
http://asia.cnet.com/reviews/hardware/desktops/0,39001729,39139114-2,00.htm
nview_info
The description for Event ID ( 1 ) in Source ( nview_info ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description...
Hi, today i have noticed that my CPU utiliation is jumping up and down at weird spots, locking my comp for about 2-3 seconds. It just started happening today. When this happens, the System procss jumps to about 60% cpu. This is wieird because i have never seen this before. I am wondering if it...
My first attempt at OCing. I think i can push it more, will try this weekend.
True volts = 1.475
max load is = 41C
idle = 31C
http://img25.imageshack.us/img25/2893/myoc4bm.jpg
Whats the max volts i should stay below?
Right, so im prime stable at 250HTT w/ a 10x multiplyer ~2.5ghz. I WANT to get 2.6, however my g.skill ram is being an ass and wont OC at all. I am not skilled in the art of ram OCing so i come to you guys.
I cant get to 260 without a divider, so here are my options
260HTT x 10 with ram...
I cant get my G.Skill HZ ddr 500 to be stable at 260. I heard this ram is good at ocing but i cant seem to get it stable at 260, even with 2.8 volts. I would get BSOD, and fail prime ram tests, so i decided to put a divider, i knew it was the ram all along, i just thought that it would be able...
Like the title says, i am unable to boot into windows when the FSB/HTT is above 240. I tried 250, but that would just restart in the middle of the windows logo. 245 would BSOD after it booted past the title bar, the welcome screen BSOD. I am able to boot into 240 and i did a 1 hour prime before...