Search results

I posted about this problem a bit ago and didn't get any help, but it recently happened again (with new 9.7s) when I attempted what I knew would crash my system. This time though I managed to catch a glimpse of a display driver failure notice, so I can now confirm what exactly the problem is...

I'm going to preface this by saying this post is very low content and pretty lame, but I just wanted to comment on it. I used to browse here a ton back around the time the x800 series launched and there was a huge divide between the ATI crowd and the NV crowd. Tons of flame wars, people...

GPU: I'm using CCC OD to overclock, stock HSF. Temps hit ~77c with fans on auto during load. If I up the memory to anything higher than 1020, even 1030, I get isnta-artifacts in ATI Tool. Same goes for the core, any jump of even 20 Mhz gives artifacts. I'm wondering if there's a way to...

Alright so this is my first foray into LCD/HD monitors. My previous monitor was an 80lb 21" CRT so this is quite the upgrade. Can anyone give me the lowdown on resolutions with an LCD? Having just tried a few games, I notice that any resolution other than 1920x1080 seems a bit blurry, this...

These confuse me. I ran these benches earlier today using the benchmark tool on Very High, 64 bit, DX10 and VSync on. I used benchmark_gpu and did 3 runs on each. The results... are weird. Run #1- DX10 800x600 AA=No AA, 64 bit test, Quality: VeryHigh ~~ Overall Average FPS: 45.955 Run #2-...

Just wondering if there would be any given specs in sig. My gut says not at all, as I think I only use 2.5GB or so while playing a game like Crysis, but it's pretty cheap so I was wondering if I should pick some up now or just not bother.

I have an MX Revolution that never gave me problems on my old XP rig. I recently upgraded to a new system with Windows 7 and whenever I'm playing games the mouse will intermittently drop connection for 50ms or so entirely randomly. I'll be playing and go to look left, and it'll stop accepting...

So I'm on my entirely new PC with Windows 7 and it's great, except for one thing. Whenever I view a video like the one here: http://kotaku.com/5313559/watch-penn--tellers-video-game-bullshit-episode?autoplay=true I get a weird issue. If I watch it regularly, it's fine. If I go full screen, it...

It came stock at 900 / 1000 and I can only hit 950 / 1020 stable. 77c temps that don't go any higher and fan is auto-ing around 35-40%. Using ATI Tool to check for artifacts. It usually doesn't give 'errors', but does the good 'ol yellow pixelly thing. Any way to get this higher or is my...

I'm using the stock HSF. I'm wondering a few things. What kind of temps should I be looking to keep the CPU at under load? <65c? Should I only be changing the multiplier on the CPU to OC it? When, if ever, should I bump the HT by a bit (in the proper way)? I'm planning on keeping the...

After not being able to get hmonitor to run on my system (wanted to check temps) I stumbled across AMD OD (I have an x3 720, FYI). I installed it and searched on these forums for it, and people seem to hate it. I have a few questions though. If I go into the BIOS and set the multiplier to...

I've burned the RC .iso direct from MS and am currently on 32 bit XP. I wanted to run the CD to ensure the burn was successful (since I'm doing an entire hardware swap) so I don't have any issues, but the CD seems to be totally unreadable. Is this normal, or has something gone wrong with the...

I have a Gigabyte GA-MA770-UD3 Rev. 1, Phenom II X3 720 and a Sapphire 4890 OC. I'm wondering what utilities I should be using to OC and stress test the CPU/GPU. Is ATI Tool still around? Gigabyte boards come with EasyTune 6 which looks like a nice all in one solution. What should I be using?

I have a Sapphire 4890 OC and an x3 720 BE en route and am going to be overclocking. I'm looking for the best air coolers around for both that is a max of $50 (each) with shipping CAD (no Thermaltake 120 Ultra's). I'm open to options that are slightly cheaper, as that's the absolute max I...

With stock cooling? I can't really seem to find many OC results on the interwebs for this card, anyone care to share their experiences?

Rebuilding my PC to a 4890, x3 720 BE with 4GB DDR2-1066. I was going to install Windows 7, but I was watching some random 'review' type videos on YouTube last night and one of them mentioned not to install Windows 7 on your 'main' or only system for... whatever reason, I'm not really sure...

What drivers are people using for video cards nowadays? Manufacturer (Catalyst)? Back in the day it was all about the Omega drivers, but it looks like they've gone by the wayside. My 4890 is incoming and I'm just curious what the best (or 'standard') drivers are now.

Currently looking into the Gigabyte GA-MA770-UD3, since it fits my price point. I started to look into the OC'ing potential on the board, but can't really find any reviews. Does anyone know if the board will suit me alright for basic OC'ing on air, or is there another one for around $100 CAD...

In the next week or so I'll be upgrading the system in my sig to a new one. I'm getting a 1TB WD and keeping my two 74GB Raptors to run Raid 0 for OS. My question is how exactly should I work the file transfer / OS installation? Can I install the new drive on my current rig, copy the files...

Man it's been a long time since I've been here! Years ago I used to be hardcore into benching, OCing and all things PC related back when SLI was just a dream... I'm looking to build a new PC, but I've run into a problem. I know nothing about anything anymore! I don't know anything about dual...

Are there any results around for how they overclock? I've been out of the loop for months now, but the x800 XT's were generally getting around 580+ on air, just wondering how well the new x850's fare at overclocking. I know they have better stock cooling, but is there enough headroom to get...

http://pc.ign.com/articles/585/585596p1.html "Many of you have probably already witnessed an early technology demo that featured this tech, yet it didn't make it into the final game. Well, Valve is not only adding it to the Source engine, but showcasing it in a new level called "The Lost...

December 28, 2004 : Added RAS to CAS Investigation. Updated CAS results with LL / LH scores and removed CPU Arithmetic. SuperPi to be added shortly, was unable to find a Process Timing program to measure SuperPi calculation time within 100th's of a second. Updated first post with benchmark...

2x MCP600 pumps : $158 USD / $193 CDN http://www.cooltechnica.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=AQX-50Z-DC12&Category_Code=P 1x Dual 120mm Heatercore (with 2 2x120mm shrouds) : $82 USD / $100 CDN...

EDIT : If you want the quick version, just go to the numbers. I don't mind putting down some cash for quality parts (see sig :p), and am getting watercooling after Christmas. I know nothing of pumps, head, flow rate, blah blah blah at all. I hate taking the quick and lame way out (as I hate...

S939 FX-53 @ 2.6 Ghz, x800 Pro -> XT @ 575 / 590 I ran the demo twice, getting benchmarks for each and averaging it out. I began benchmarking with FRAPS as soon as there was the initial image on the screen, and stopped it before the demo fades out to total black before the credits roll. If...

For those with NV cards or just for anyones viewing pleasure, here are a few high res shots from the two new ATI demos. If you own an x800 line card : The Project (CryTek Demo) Ruby Demo If you don't : The Project (Video] Ruby Movie First off, the Ruby demo with Motion Blur (Can't...

Just curious about a few things here. First of all, I know very little of watercooling and pump specs. All I know is that head is good (as if I didn't know that anyways :p ) and that's about it. So I was going to cool my GPU only, as that's what I concentrate on mostly. But I've started to...

Welp, just as I'm sure everyone expected, an extra 3 FPS! http://www.forum-3dcenter.org/vbulletin/showthread.php?t=187189&page=1&pp=20 Reviews everywhere tomorrow (today, technically).

Well, ATi has announced their new refresh (albeit a slight refresh), I'm just wondering where NV's offering is, or if they've announced it? I'm also wondering how you guys think the x850 / new NV line of cards will OC compared to these ones. Most x800XT's reach past PE with no problem (while...

x800 Pro -> XT @ 575 / 590. One pencil vmod already done by previous owner (had this card for 2 months or so now). Now, if I go to 580 / 590 I get artifacts (the kind that randomly jut out from textures and geometry). I'm wondering what (technically) causes this sort of thing, and how I can...

Welp, the FX-53 hits 2.64 Ghz (not Prime stable, bench / game stable though) with the stock HSF. I plan to get some AS3 this weekend and use that rather than stock paste. Now the question is, what should I be cooling first? The FX, or the XT? I plan to Vapochill the FX at some point, so...

237x11 wasn't stable at 1.65v and errors came up in Prime. Now, it's at 1.71v - 1.74v and is stable. Stock HSF, Prime temps are 55C-56C. Just wondering if this is safe for 24/7 use with the stock fan or if I'll be burning out my CPU at that temp for extended periods. I've benched at 240x11...

Just curious what people have gotten the highest 3D03 scores with. I've been using the 4.12b's, but for some reason the scores on 2003 for me aren't seeming as high as they should be (compared to people with similar setups). Just wondering what drivers people have had the best luck with...

Feel free to analyze. Done using Canals / C17 demos from Brent Justice's pack, found here. Specs in sig. RA = Reflect All RW = Reflect World All settings set to High, all AA / AF settings set in game. CP set to High Quality. 5.1 Surround Sound enabled, set to High, using 4.12b's...

System in sig. Now for the question. I'm able to actually hit 575 / 590 (68C or so load) without any issues (that I've seen so far). I planned to get watercooling in December or after Christmas, but I'm not wondering if it'll even be worth it. As it stands, if I push the card any farther...

Well, I take a hand at overclocking after finally putting my raptors on SATA 3/4 instead of 1/2 and can finally start to OC. My problem is I've got 230x11 at the moment, and any higher and my PC dies. Ram is at 2.5-3-3-8, voltage is 2.8v (I think) and my CPU is at 1.5v / 1.6v. What could be...

What control panel settings should be set? It's usually at High Quality, should it be bumped down to High Performance for benching 3D03/05?

:D