Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
sprocket said:Were you aware that LL makes those same units with 120mm fans instead of 80's?
n00btard said:the TDX-in-mobo pic is really well done \\
what camera are you using?
sprocket said:Oh.
My bad.
Haste266 said:thats a lot of 90 degree bends!
Pen3 said:Theorie, i am working on my new wc setup also and i am using a V2000B case and it looks very similar to your case. I am still cutting holes and such and ill post my pics on how i set the BIX480 later.
Theorie said:well the res has 3 threaded ports in it. i was going to connect the fillport to a fitting in the 3rd threaded port...
so on the res, one port is an in-line, one is an out-line, and the 3rd is a fill line.
Pen3 said:Theorie, i am working on my new wc setup also and i am using a V2000B case and it looks very similar to your case. I am still cutting holes and such and ill post my pics on how i set the BIX480 later.
Edit: Well here it is
Theorie said:also, i noticed your rad is going to be blowing hot air right into the top half of your case...are you sure you want that? its really going to raise the ambient temp around your mobo & other components... why mount the fans to blow down?
Theorie said:great card. i dont know if i can justify spending $800 on one video card though. i think im going to wait several months before i pick up some 8 series cards.
also, i noticed your rad is going to be blowing hot air right into the top half of your case...are you sure you want that? its really going to raise the ambient temp around your mobo & other components... why mount the fans to blow down?
aaaaaaaaaaandy said:i really like the way your setup is going. i think you just inspired me to get that case/liquid cooling. good job
matsuya said:Looks excellent so far Theorie.
Do you have pics of the lian-li enclosures from the front of the case. I have the same case and thinking about getting the ex-23 or 34. How is the fitment?
matsuya said:Looks excellent so far Theorie.
Do you have pics of the lian-li enclosures from the front of the case. I have the same case and thinking about getting the ex-23 or 34. How is the fitment?
Sweet!Peterson said:
Haste266 said:did u mod the LEDs on the rheobus? those things are briiiight. even with the resistor mod, they still put out some good light.
Peterson said:
http://www.overclockers.com/articles1141/Theorie said:no not yet...i need to do that still actually...whats the best resistor to use? link maybe?
Pen3 said:Theorie, heres my update, but still more work to do with wires and maybe reroute the tubes for cleaner look. thees are 11/16 od 7/16 id tubes maybe ill go to the thinner 5/8 changed all the ones.One last thing i did was change all the fittings to EK High Flow barbs and the tubes slide in easily, but has flanges on the tip to hold the tube in good i actually ran my old wc setup without and clamp for a year fine, but i use zip ties on this just cause its more expensive setup. And they look sexy