Thanx for even looking at this post guys....I am just wondering if it is possible or even advisable to run the now SB chips at full overclock. As in not idle at 1600mhz and ramping up to 4.5Ghz when needing it...what are the setting to change to enforce this.
Also the setting on the Asus P8P67 Deluxe on board like the TDU switch so I need that on or off....
I currently have my 2500k @ 4.5Ghz and I am happy at that for 24/7 use but I am not sure if I have the volts etc set right. The few overclocking guides I have read are somewhat conflicting especially the VRM freq of 350. Am I pretty safe with most setting on AUTO even if my ram is underclocked (Set to 1600) and I have DDR3 2000Mhz.
I have the CPU cooled with a corsair H50 and idle temps are very good, but need to be monitored as I have just clocked this now.
Any input would be great or links to other very good guides.
Also the setting on the Asus P8P67 Deluxe on board like the TDU switch so I need that on or off....
I currently have my 2500k @ 4.5Ghz and I am happy at that for 24/7 use but I am not sure if I have the volts etc set right. The few overclocking guides I have read are somewhat conflicting especially the VRM freq of 350. Am I pretty safe with most setting on AUTO even if my ram is underclocked (Set to 1600) and I have DDR3 2000Mhz.
I have the CPU cooled with a corsair H50 and idle temps are very good, but need to be monitored as I have just clocked this now.
Any input would be great or links to other very good guides.