Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
If it is using thier newer High-Flo fittings there is a good chance they will have straight 9/16ths threads and seals with an o-ring.kleox64 said:Ive ordered my dangerden stuff and Iam assuming the Maze 4 SLI LP and Chipset (ASUS A8N-SLI) are using 1/4" NPT threads as answered by dangerden.
I hope Iam right!
kleox64 said:9/16 is what?
NPT, NPSM, NPTF, BSPP, BSPT ?
Just being parrallel would make them seal less but they wont seal by the threads but by an o-ring which should give a better seal..kleox64 said:Iam thinking the 12 is too coarse for use in watercooling, it would give you 3-4 teeth at most into the waterblock. Anyway Ill find out tommorow when I get the GPU LP blocks together with the chipset block, the dangerden website lists BOTH as having highflow fittings aka 9/16. Hopefully if its 18 then Ill just convert the thread to BSPP.
One more thing the UNF/UNC threads look parrallel so Iam assuming they are more leak resistant when compared to NPT?