Intel 2600CP board supports 16x16GB DDR3-1600 RAM

[ymc]

http://www.intel.com/content/www/us/en/motherboards/server-motherboards/server-board-s2600cp.html

But where can I find these single stick 16GB DDR3-1600 RAM though???

 

[drescherjm]

I would expect 32GB dimms would work as well although these are a few thousand US each.


Here is a few 16GB REG ECC dimms (DDR3 1333):

http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007952 600082361&IsNodeId=1&name=16GB
http://www.crucial.com/store/partspecs.aspx?IMODULE=CT204872BQ1339

Here are a few that are DDR3 1600:

http://h10010.www1.hp.com/wwpc/us/e...86-3924237-64186-5205328-5205329-5205332.html
http://buymemory.com/16gb-ddr3-1600mhz-ecc-registered-server-memory-dimm-TS2GKR72V.html
http://www.provantage.com/axiom-memory-solutions-ax31600r11a-16g~7AXM98T9.htm

 

[ymc]

Thanks for your reply. Seems like it is around $250 per pop. Sounds like a good deal.

I thought about 32GB sticks too but looks like according to the spec, if you put them on the board, they can only run at 1066

 

[cyclone3d]

Thanks for your reply. Seems like it is around $250 per pop. Sounds like a good deal.

I thought about 32GB sticks too but looks like according to the spec, if you put them on the board, they can only run at 1066

And that is when you up the IMC voltage on your CPU and "overclock" the IMC... unless there is some hard coded limit in the BIOS that is specifically there to limit the speed of the 32GB DIMMS.