M a d c o w
Limp Gawd
- Joined
- Feb 27, 2006
- Messages
- 350
PM sent
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
PM sent
Your kidding, right?
Aqua Computer makes a fan, and these are it. They are the perfectly compliment for the Aquero and AC system (I think), they can be used with an RPM value under 500 and can be started @ 5V.
Actually no, he isn't. I'd rather not go into the chemistry of it (basic as it is), but mayonnaise can dissolve the glue thats used in those adhesives, and thus remove it. It's probably better to use a more professional solution for clean-up and sanitation purposes, but it's good if you need something quick .
Anywho, cool work so far. I just wish someone was building something wooden around here so I could have a little insight on my project .
Holy CRAP that is some SICK work.
Your project on this LiLi is very similar to my own that I've been doing on and off for a couple months on my PC75. I have not been worklogging it to any level of detail close to this.
Love the level of detail on the sleeving of the power cords - reminds me of blood vessels.
Nice of you to drop by and say hi What's going on with school?
Wait till you see the hard and optical drive loom.
Just took another look and they look like a rebadged Yate-Loon.
mayonnaise works good as a adhesive remover if you don't want to $$ on other stuff
...as I continue to build my hybrid AC system.
Your wiring work is .... at ridiculously cool levels. I'm so taking some of your techniques .
Headed back in December for the last six months for senior project. On co-op now at GE making digital mammography detectors. (saving boobies!)
If it's anywhere near as cool as the simple freakin 4-pin power connector, I may die.
So where is your worklog so I can check out the eye candy? Feel free to use any idea or technique around here as the more the merrier.
I'm still in the process of getting my parts and making hardware decisions. I'm trying to decide whether to get a tubemeter or an aquajet, I already have the rest the AC parts I'm going to use (Aquero, flowmeter, aquatube, blocks, thermal sensor, etc..). I thought about making it a worklog, but your worklog would put it to shame, lol.
Are you using all of your temp probes? I still have trouble placing them. Like the best best way to monitor a CPU block with one.
I ran SpeedFan and am slightly concerned about the temps showing like 126C. Anyone know what this represents?
Did I ever mention why I had to build FFI? It was because my normal work computer, after being water cooled for four years, suffered the indignity of having a glass of water being spilled right into the inside!
Like it so far. On the hard drive power cables why didn't you use sata connectors over the older molex ones? A lot of sata drives don't have molex connectors. Just seems like your giving yourself extra work to do in the future if you upgrade the drives down the road.
Ok, I'm digging the Silverstone PSU Acoustic Cover. You MUST give me a link as to where you bought it. Also, does it work as well as advertised?
I remember the engineers saying that a slower fan would lower output... do you really need the 500 watts still? you could probably get away with a slower fan
They said the same thing to me so that was why I thought I would try the noise direction thing first. My nephew has the same PSU and he already replaced the fan and hasn't seen any degradation in his rig. Next time the PC is down for some more work I'm going to replace the fan and put in a temp sensor on the main heat sink so I can use the Aquaero to automatically adjust the fan to the temp load.
Well I see your at it again. I think you spend more money on sleeving than I do on my entire PC
Are you really going to SLI 7800s? I was thinking about picking up a second 7800 GT myself this summer, but then I figure why not just buy a single faster card?
Yeah I got bored and decided to have a little fun. You wouldn't believe how much I've spent on sleeving and heat shrink. I think I will start buying the stuff by the roll.
Yeah, that's the issue always with SLI. Should I spend the big bucks for a single card or get the lower class card and pay for two...