First a little background:
I've been experiencing erratic boot issues for a while, which encouraged me to replace my aging motherboard/CPU/RAM. The problems were inconsistent, but often video output would cut out after POST, I would restart, say to load windows normally when it told me...
So I take it from your previous post that you do have a colorimeter? I'm surprised that it doesn't give you a black point at all. Unfortunately, I know very little about calibration hardware and software, so I don't know of any free software that could help you out. I just used the program that...
I've posted about this before, but never really got much of a response.
My first zr24w didn't have any dead pixels, banding issues, or severe blacklight bleeding, but even after calibration at 100 contrast, I found the black levels to be unsatisfactory. After reading the tftcentral review, I...
Excuse my noobishness, but you're saying that one should go into catalyst and set the overall gamma curve to 2.2 before undergoing any hardware calibration? When I adjust the gamma slider up, it makes a line with a decreasing slope, not the increasing slope shown here...
My zr24w arrived 36 hours after my initial order from Overstock. My initial impressions are good, but calibration has been tricky. I decided to buy the zr24w after reading tftcentral's updated review. It seemed as if, while initially the black levels might be the one detriment to the panel, they...
Looks like there is 15% bing cashback as well, but I don't know if it's possible to combine the two. Does anyone know? If you can get both discounts, then this deal is smoking
I really want to get the Scythe Mine heatsink but I've heard conflicting information regarding its compatibility with the P5B-E (plus) motherboard. Does anyone here have both of these or knows firsthand that the two do not work together?
Right click the taskbar and deselect "lock the taskbar." Then simply left click it and drag it to the top of your screen. Once you've done that relock it again and you're set!