I'm looking for S939 mobo to replace one I fried
my preference would be a Epoc 9NPA series
but I'm open to others
Asus
DFI
Abit
MSI
Gigabyte
Looking for something in the next 24 hours. After that I'm going to have to buy retail.
Most reviews I'd read talked about a short lifespan of the Enermax Liberty 620W PSU
This morning in the middle of playing World Of Warcraft it popped. Smelled the wonderful smell of fried electronics.
Wouldn't even think about powering back up.
Logged into newegg's website and was JUST...
I'll get pics up a little later
Sony DSC-F717 with the original box. Camera is in good shape one scratch on the body. takes incredible pictures
Comes with the following
3 batteries
1GB memory stick
UV lens filter
cross star lens filter
circular polarizer filter
Sony HVL-F100 Flash(nice...
I have a laptop that currently is using a 120GB Seagate Ultra ATA-100 drive.
I want to replace it with a 7200RPM drive. Newegg lists most of the drives with ATA-6 and only a 80GB as Ultra ATA-100.
Can I buy the ATA-6 drive will it work?
FWIW the laptop is a Acer Ferrari 4006Wlmi Turion ML-40.
Needs to be XP PRO x64 Edition
I have a valid license but my disk is destroyed.
I'd like to find a disc of this software so I can reload my laptop.
Thanks
Did this a while back on here and had great results.
Doing it again see if I can clear out the remaining selections.
All Titles are $6/title
Shipping is $3/order unless you buy 10 titles then it's free.
I'll be updating the list as frequently as possible. If you have a question about a...
I need one 5.25" bezel off a thermal take case with the metal screen and foam filter behind it in black.
I'm specifically looking for it off an Armor case but Thermaltake seems to use the same faceplace of a few of their cases(armor, shark, kandalf etc etc)
I'll paypal for the item. I'm sure...
FS 2 XFX PVT70FUNF7
Factory Overclocked 256MB 7800GTX's
bought one in january the second in february.
paypal only
no trades
$400 each shipped to CONUS
paypal [at] sunsetorangess dot com
contact
sky042 at the same domain as above or gmail.com
heat under Sky042
No lowball offers...
For sale
Gateway M675PRR (custom)
P4 3.0HT cpu
512MB DDR400 ram
Radeon 9700 64MB video
60GB HDD IBM/Hitachi 5400rpm
17.1" WSXGA+ screen 1680x1050 (glossy and gorgeous)
B/G Wireless
DVD +/-R RW
Backpack carrying case targus note XL
will include Windows XP Pro with COA if desired.
In...
For sale
Gateway M675PRR (custom)
17.1"WSXGA+
60GB HDD
P4 3.0HT
Radeon 9700 64MB
DVD+/-R RW
win XP pro
1GB DDR400 (512 installed)
Comes with carrying case
Shipped in a gateway box
Heres the thing. There is a problem with this laptop is doesn't post.
It powers on but nothing after...
TAKE THE ENTIRE LOT FOR $300 (CURRENTLY 111 Discs)
PLEASE BUMP IF YOU LOOK
Ok I'm getting married in May. I figured I'd sell off most of the DVD collection as we almost NEVER watch them now that we've got netflix and also a comcast DVR.
Most of these movies have been watched 1-2 times...
ordered the last peices this moring
All in a thermaltake Armor Series case
520W 34A PSU
GF mx4000 PCI video
1GB of G.Skill Ram
Opteron 148
Highpoint Rocket Raid 2320 PCI-E SATA-II 8 Port card
8 x WD RE 250GB drives (the 320's were out of stock)
2 x WD SE 80GB drives for Raid 1 OS...
TAKE THE ENTIRE LOT FOR $350 (CURRENTLY 125 DISCS)
PLEASE BUMP IF YOU LOOK
Ok I'm getting married in May. I figured I'd sell off most of the DVD collection as we almost NEVER watch them now that we've got netflix and also a comcast DVR.
Most of these movies have been watched 1-2 times...
PLEASE BUMP IF YOU LOOK
Ok I'm getting married in May. I figured I'd sell off most of the DVD collection as we almost NEVER watch them now that we've got netflix and also a comcast DVR.
Most of these movies have been watched 1-2 times some have never even been watched.
All guaranteed to be...
So far I pushed my G.Skill FX's to 320mhz (DDR640). IMO not bad for a kit sold/rated as DDR400.
Albeit I did this at 3-4-4-8 I might be able to tighten that up or go higher or both I ram out of time to mess with things. I just had done a quick and dirty ram OC one morning.
What would be a...
Fresh from RMA both still sealed in anti static bags.
Both sales are BARE drives only!
Maxtor Maxline Plus II 7Y250PO 250GB hard drive.
$90 shipped to lower 48
Western Digital WD3200JB (recertified)
$100 Shipped to lower 48
Warranty till 5/10/2006
Prices are not negotiable.
Will...
First the bridge. I'm going to assume it doesn't matter which way it's installed.
Second my directions said I had to hook the monitor to the second card but when I tried that the monitor never turned on. It only turned on when hooked to the first card were my directions just mis-printed from xfx?
What does everyone use?
Since I'm using the free version I'm limited to the default setup but if I want to compare my numbers I'm curious what everyones settings are resolution wise and all.
for the record my first bench scored 8192 on 3dmark2005 with the free version and ONE of my GTX's...
I know there is the DOS version but is there a memtest that runs under windows?
I don't have a floppy in my one machine and I'm thinking that my g.Skill 2GB kit may be generating errors.
Tried Eclipses guide this time and step by step till I found the max on my 165
Nevermind the temps my 165's temps aren't super accurate. it can report 43C and I can touch my fingers to it without getting burned.
cooled by Thermaltake Big Typhoon.
Also note this is before I found the max on my...
Going through and trying to properly overclock my Opty 165 via Eclipses method I found my max HTT link to be around 340
This is an Epox 9NPA+Ultra
Just wondering what some other people have hit as their max HTT.
I setup F@H based on the instructions from hardfolding.com
the console is setup to run as a service.
I see it in my services tab under task manager but it is not using any CPU power currently. It's just sitting there. How can I tell if I've got it running?
It's going to be a storage drive on my network.
It won't see any regular use aside from just sitting there holding hard drives. I already have 2 dual core machines for my day to day tasks.
The machine so far consists of
Opteron 148
ECS KN1 Motherboard(hand me down from my X2 the X2 is...
My buddy has a chip he's thinking about OCing to do some gaming with but His mobo has him limited to zero overclocking abilities.
So before he buys a new mobo he was curious what the potential is
It's a S754 A64 2800+ Clawhammer core chip. I don't have info on stepping and batch just 2800+...
For use in my P-180.
Needs to control 2 120mm San Ace fans and a few others.
Must support 4 pin Molex.
I'd like support for 4 fans minimum of 2.
Price isn't much of a concern so much as quality and reliability also style and looks will factor into it.
If I can keep it under $75 I'd be...
On my x2 rig when I try running it overclocked it'll just randomly shut down.
Usually it happens under load specifcally while ripping DVD's
X2 4400+ 1.40Vcore when OC'd otherwise runs around 1.28
ECS KN1 Exteme NF4 Ultra Mobo
Overclocked setting is 2.4Ghz(218FSB)
G.Skill Extreme Series ZX...
http://www.newegg.com/Product/Product.asp?Item=N82E16820231032
2GB G.Skill ZX
I'm just wondering if anyone has been able to figure out what G.Skill is using. The G.Skill tech on XS just says he's not allowed to say who's IC they're using due to some contractual agreement.
so I'm looking into building a file server.
I'd like to run 6 320GB HDD's in a Raid 5.
I can only find one card that'll do 6 SATA 150 drives.
http://www.newegg.com/Product/Product.asp?Item=N82E16816118011
First it's pricey but if that's what I need to buy then so be it.
Second the...
I've got some g.Skill TCCD ram in my Opteron which is my overclocked machine.
I'm wondering what woul be expected/good timings for TCCD at 227mhz right now I've got it at 2.5-3-3-5 but I was thinking that TCCD should be able to hold tighter.
thanks
How do I get the fan down into the spot in front of the lower hard drive cage?
I couldn't for the life of me figure out how to fit the fan into that location.
Running X2 4400(overclocking)
6 HDD's
2 Optical
7800GTX
and a vareity of case fans.
My current PSU is fine at stock speeds but when I try overclocking it overloads and clicks off under load. (verified PSU is the weak point by reducing the load on it and then OCing)
I'm looking at
Epower...