1024mb Crucial Value testing

[BillR]

how much voltage falcon? that's respectable for 2 sticks
have you tried 3-4-3?

Ok, dumb question. Why 3-4-3 over 3-3-3.

 

[(cf)Eclipse]

Ok, dumb question. Why 3-4-3 over 3-3-3.

just because some of the sticks like the higher trcd.. especially when in dual channel

 

[EvertonB]

I have two of these boards and I'm having a mare clocking the ram.

My spec is in my signature - when I reduced my multiplier to x7 I managed to clock my 2x1Gb bars up to 245Mhz just by increasing the CPU freq and increasing the voltage to 2.85V - I just let the mobo choose the timings. So I assumed this was my max speed..........

However, whenever I move to 235x11/2.585Mhz or 260x10/2.6Mhz or 275x9.5/2.613Mhz meaning I need to set the memclock to 166 my machine freezes. This even happens if I reduce my timer to 133. It only works if I set the memclock limit at 100 which at 260x10 gives me a crap 130Mhz.

Any ideas why? I really want to fix this as I'm running slower than out of the box!!!!

 

[(cf)Eclipse]

that's an asus board? try changign command rate to 2T

 

[lw3d]

Oh My Gosh, not another 1 gb stick to consider ... NO ...

Eclipse, should I even consider this memory

 

[(cf)Eclipse]

about 6 months ago, yes. today? nah, better stuff can be had