X FalseBuddha X
n00b
- Joined
- Jan 21, 2008
- Messages
- 2
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Whats the biggest PSU that will fit without having to remove the bottom fan mount/screws?
I'm mostly looking at 800w+ PSUs.
I know it's not the TRU, but here's a few pics of my case open with the Scythe Ninja. Plus a pic of the front, just for kicks (can't remember if I already posted mine here on this thread)
This one shows the Ninja compared with everything else in the case:
This one gives an idea of the depth, there's a good inch or so for room.
And here's the front with my media card reader
I really like that media card reader, I got it off ebay for about $10 total. I didn't like all those ones that were 52 in 1 or what not, they were messy looking and didn't look....good. So I was trying to find one from a major distributor, and besides that, all I really needed was something for an SD card. I believe it came from one of those Dell Optiplex's (or at least that's what the auction said). Only negative about that is the internal USB cable is real short, and it barely makes it where its plugged in. It has a spot for a molex, but I only have it in the usb and it works fine, but it might make it faster or what not if I actually plugged it in with the molex... I dunno.
BTW, I've cleaned up the wires since, spent a good hour or so routing.
Dustin
I demand you tell me where you got that side panel!!!!!!!!!!!!
I have tried emailing coolermaster to no good luck.
carajean206 said:I demand you tell me where you got that side panel!!!!!!!!!!!!
I have tried emailing coolermaster to no good luck.
can i link e-shop here?
Nice, thanks for the pic. I can't tell from the pic, but did you do the fan mod in the front of the case or no?
Thanks, no reason but maybe just to hide the unused cables.but i think its better to do it the other way?just curious to know why you put your power supply in upside down ?
nice job btw.
Thanks, no reason but maybe just to hide the unused cables.but i think its better to do it the other way?
Will an ASUS Silent Knight II fit into this case? I'm pretty sure it will, but I wanted to double check.
Did any of you guys accidentally break the clips when installing your optical drive/floppy drive? I accidentally bent one of the clips too hard when I was installing a floppy drive and broke off one of the clips. Now the 5.25" shield is loose since only one side of the clip is there. What should I do? Should I try to glue the clip back or just tape the shield down so that it's not loose?
shoot an email to cooler master and ask for a replacement.
I'm not using mine so if CM won't send ya one pm me and we'll get ya one =]
btw i'm using usb floppy/card reader comes in handy.
I understood and like i said ask CM to send ya one or I'll send my un-used one
well her she is up and runnin
By sherbanater, shot with DSC-P73 at 2008-02-17
By sherbanater, shot with DSC-P73 at 2008-02-17
By sherbanater, shot with DSC-P73 at 2008-02-17
when i get my fan controller and fans i will post more pics...hope you like.