Need a suggestion for 8GB (2x4) for this board.
I picked up some Corsair Vengence (CMZ8GX3M2A1600C9) and this damn thing will not POST. I get the red LED on the memory test. Tried all the memory slots and different configs of memory. 1 slot, 2 slots, single stick, two sticks etc.
New build...
I have read a few discussions on this and I still dont think I have a clear answer.
In my situation, what real world benefits would I see going from a Q9550 clocked at 3.6 to a 2500k?
I am wondering if the Q9550 is bottlenecking my GTX460 1GB @ 900/2000, 1920x1200. with as much eye candy...
I have two arrays name() and age(). I am using a DO WHILE loop to populate the two arrays. After the arrays are populated I am using a combo box to select name() and need to pass the () on to the age variable but I am not sure how to do that.
When I select an item in the combo box I know...
So I get a text from my nephew tonight stating his PC "won't boot and there is nothing on the screen" First thought was VC, but I put the VC from his machine in mine and it booted just fine.
CPU fan is spinning. I unplugged the HDD and CD ROM drive no change.
The only things attached...
Building a new rig and I am going with the MSI P55-GD80 and an i5 760 but am not sure what speed of memory to buy. I like the reviews on the Ripjaws memory from G.Skill and have used their memory in the past with great success.
I was leaning toward this...
I picked up a GTX 470 SC yesterday to bench it against my GTX 460 SC and I am curious as to what you guys think about these results.
EVGA GTX 460 SC Edition Clocked to 850/1700/2000
Vantage = 8284
Heaven = 40/994
FC2 Ultra Settings = 69
Metro 2033 High = 36
Metro 2033 Very High = 30...
EVGA Model # 01G-P3-1373-AR - http://www.newegg.com/Product/Product.aspx?Item=N82E16814130568&Tpk=01G-P3-1373-AR
Manual setting of fan at 70%
It wasn't stable at 820+ when running benchmarks.
-Funk
I am looking for an inexpensive video card to drive two monitors. Not a gaming card, just a card to do everyday stuff like Excel, Word, email and surf the Internet's.
Anyone have any suggestions?
-Funk
Got a client with about 25 Internet connected PC's. I have been using a Linksys router up until today. The Linksys crapped out and I am on the hunt for a rock solid router to share the Internet connection. It has to have decent logging capabilites, VPN would be a bonus but is not required...
For the life of me I can not figure out how to up the CPU voltage on this MB.
CPU-Z shows the voltage at 1.2. I was hoping to bump it up a bit to test stability but nothing I change in the BIOS works.
Anyone?
-Flake
Got the above hardware installed. Using 4x1GB of G.Skill RAM was an utter failure with regard to overclocking. Using 2x1GB in slots 1 and 3 resulted in a stable overclock of 3.8. 450*8.5.
Since I running Win7 x64 I would like to up the memory to 2x2GB of PC8500, which isn't an issue. The...
This combo netted me 3.6 with an AC7
E6750
GA-P35-DS3L
(1x2) 2GB G.Skill PC2-6400
Asking $120 + shipping for the set.. Worked fine when I pulled it 4 days ago.
-Flake
Q9950 on a EP45-UDL3. Running stock @ 2.83 it fails IBT. I mean, this is stock on a brand new MB. Temps only get to 47 or so when running IBT.
Boot the memtest CD, and it runs without any errors.
WTF is going on?
-Flake
Running OCCT and smal FFT's the temps of my Q9550 are running about 66-68* across all 4 cores. The cooler is an AC7. It is OC'ed to 3.7 at the stock voltage. Idle's @ 40*
Should I be concerned with the temps?
OCCT ran for 38 hours without hiccup in this config.
-Flake
I have a chance to move some hardware around without much cash outlay and was wondering if anyone has an opinion regarding the Phenom II vs an E6750. Either the the X3 or the X2 550.
Would I see a significant boost in performance going from the E6750 @ 3.4 to either the X3 or X2?
Day to...
All I want to do is backup my USB memory stick automatically when I insert it into my Vista machine. I don't want to be prompted, just do it. It needs to do incremental backups, no synchronization, just back the damn thing up.
Anyone have a clue as to what software will do this?
-Flake
my Samsung 244T will not power on and I fear it is dead.
It has been awhile since I purchased this monitor and as a result I have not kept up with Flat Panel technology.
Can some suggest a comparable monitor?
-Funk
I just picked up a GTX260 to replace my 8800 GTS 320mb card with the hopes of turning up the eye candy on games like STALKER, Crysis, etc. I mostly play FPS games, with an occasional RTS. Most of my gaming is in XP with a couple games installed under Vista 32bit.
My CPU is a 6750 @ 3.6 on a...
I have a couple of slim line cases and I need a PCI Wireless card. USB is not an option.
Anyone know where I can source a couple? They need to do WPA2 also.
-Funk
One ISP and I need to use it for 2 different LAN's. Each LAN needs to be isolated from the other, yet each LAN needs to use the same ISP and gateway.
Any suggestions?
-Funk
I VPN into NT4 box 1 using MS PPTP. Once the VPN is up I use VNC to connect to an XP box. Once on the XP box I VPN into NT4 box 2 using MS PPTP. It goes as far as “Verifying Username and Password” but fails to authenticate with error 721. I have rebooted both NT servers and the...
I am getting ready to install the A7 into my CM690 case.
My question is, If the fan on the A7 is pushing more air than the rear case fan can evacuate what issues might I run into?
-Funk
I am looking for some decent flowing 120 mm fans that support PWM.
Something along this line: http://www.case-mod.com/arctic-cooling-af12025pwm-120mm-pwm-case-fan-p-3073.html
Anyone have an opinion or two?
-Funk
Ok, I moved off of the AMD 939 platform to this Intel rig. OC'ing an Intel CPU is new to me as I have been an AMD user for many years.
I got everything up and running but for the life of me I can't get this 6750 over 3.4.
Multiplier is at 8x
FSB is at 430
Ram is at 1:1
Vcore is 1.45...
Got a buddy who has to pull the power switch jumper on the MB every time the system looses power to be able to boot the system.
If he pulls the power cord out of the wall, he has to pull and replace the power switch jumper on the MB before system will boot.
Any thoughts on this one...
Any comments on this build from an OC gamer standpoint?
G.SKILL 1 GB x2
http://www.newegg.com/Product/Product.asp?item=N82E16820231088
MSI P6N SLI Platinum 650i
http://www.newegg.com/Product/Product.asp?item=N82E16813130081
E6600...
I am contemplating replacing my Opty 170 setup to an E6420 C2D setup. MB, RAM and CPU swap. The Opty is OC'ed to 2.7 now but I wonder how much of performance difference I will see in gaming with the C2D and my 8800 GTS.
Any thoughts?
-Funk
I picked up STALKER today and with my dual core AMD and a 7900GT it felt laggy and just not right.
So I fired up 3DMark05 and 06 and discovered the frame rate is capped at 30 FPS even at 640x480!!!
The monitor is a Samsung 244T and the info supplied by the monitor show 60Hz. Running FRAPS...
4 weeks later and I was able to OC a bit more out of this Opty 170 and wanted to know if I am at the limit of this CPU. It is running in an Abit KN8 SLI rig. Temps with the stock cooling are about 55-56 under load.
If I raise the FSB to 311 Prime will crap out. It is stable for 18 hours...
Any thoughts on what kind of an OC I can achive with these?
Abit KN8
Opty 170 - http://www.newegg.com/Product/Product.asp?Item=N82E16819103586
G.SKILL (2x1GB) - http://www.newegg.com/Product/Product.asp?Item=N82E16820231047
I am replacing a Sandy 3700+ that does 2.85 on air.
Thanks...
I moved on to a 939 platform and no longer need the following items.
3 - pqi 512MB 3.0-3-3-8 Modules (Listed as Mosel in Everest)
1 - AMPO 512MB 3.0-3-3-8 Module (Listed as Infineon in Everest)
As installed, this memory does NOT do Dual Channel.
eVGA 6800 128MB NU AGP Video Card...