Search results

im having trouble getting full resolution with dvi or hdmi on this monitor. and i dont know if its my vga card or the monitor. i have a geforce 6600, maybe i need a duallink dvi port to get it right?

i can get either the RE2 or the SE16 500gb drives for the same price. so i probably should choose the RE2 right? 2 extra years of warranty and the same performence.

right now im leaning to the se16 500gb drive. it got the best price/gb ratio right now. and like several people stated its a good drive. maybe the best choice? should i go with silence now and go with performence later in the spring when ill probably upgrade from xp to vista? vista+a 10k...

hmm, the WD se16 "only" has 3 year warranty so i keep thinking that a couple of bucks more for the re2 or 7200.10 would be worth it since it has 5 year warranty? but will i really be using the same drive in 3 or 4 yers from now? im having a REALLY hard time deciding. silencing the hdd's is a...

just like the title says. should i get a seagate 7200.10 500gb or a western digital re2 500gb? will be using it as os drive + storage, so i will be making a 100gb and a 400gb partition. i like the 5year warranty. and the drives cost about the same.

dude i dont think that will work.... a p4-m is socket 479 and ordinary prescotts are socket 478 and 775. unless you get a socket 479 motherboard for your shuttle. wich i dont think even exists.

but how long is this cable "1 - main ATX cable w/24-pin connector"? :-/

hey. anybody have an antec phantom psu? i would really like to know the lengths of the cables. especially the mobo powercables. im thinking of getting a phantom psu and having it as an external psu for my antec aria based computer.

im thinking of removing the cardreader and fit a 3,5" fancontroller there. 1. find a old case with a single 3,5" bay, saw out the bay hole, fix the edges and paint it. 2. remove cardreader. 3. make a hole in the front of the aria. 4. glue the 3,5" frame you made in step 1 on the front. and...

1 zalman fanmate, 1 zalman multiconnector + 1 zalman 12v->7v converter. cheap things that comes with zalman coolers basicly. sold cheap seperatly also.

already slowed my exhaust fan down. i just want alll the info so i can make my aria a s quiet as possible. but if removing the honeycomb grill dont make that much differencem i wont bother. my best config yet is an 80mm 12db fan @12v as intake on the right side just infront of the cpu...

as the topic states... will removing the honeycomb grill reduce the wind noise from the psu fan? will it help some? or not at all? how about removing parts of the grill? and yes i have replaced the fan with one that has a batter noise/cfm ratio.

zalman cnps 7000 fits with just like 0,5 cm to spare. så if the cooler you want is smaller it will probably fit.

hey, i wanna make holes and put fans in my antec arias sides. but im not sure what kinda holesaw to get. feels stupid getting a expensive one if youre probably only use it twice. is one with fine teeth made for plastic, wood etc enough to make the holes? or do i really need one made for...

how many hdd's can you fit in the aria case if using the zalman resorator? im wondering since i have 2 in there now... im thinking om buying one, im constantly anoyed by the noise, i switched out the psu fan to a better one and slowed it down a bit, but i still get anoyed by the cpu and gpu...

i have a p4 lga775 3.0 ghz cpu so my computer runs pretty hot no matter what... im just thankful the case is made out of aluminum so it spreads the heat pretty good. right now i have one case side a little bit open.... the temps drop about 7-10 celsuis on average that way. yay, i saw now...

hey, i was thinking of bying 2 zalman op1 fans for my case, need 15 mm thin fans, really tight in my antec aria case. its for extra intakes on the sides. either 2 60x60x15 mm papst fans, @16db and 11cfm each[thats with 12v]. or 2 zalman op1's. anybody have zalman op1 fans in their cases...

i have a sata 200gb hanging on the right and a ide120gb in the middle, you might be able to fit in a 80mm if you have ide disk's on the sides. the sata cables are so much less obstructive. but it will get veryvery thight. so thight that i wont even bother trying, and i got an extra 80 mm fan...

i have an aria case with a lga775 p4 3,0 ghz, and i use the Zalman CNPS7000b-cu cooler, you need to get a little bracket thats sold seperatly, only costs a couple of bucks. since the lga775 processors runs very hot you have to run the zalman coolers at 2000-2200 for acceptable cooling...

putting a layer of some ordinary paper tape on the area the drill goes through should prevent scratches an also allow you to draw where to drill/saw without any problems. does removing the honeycomb grill help with noise also?... if so ill do that too :) and put the grill thats used in the...

i just put in the new fan in the psu.... sounds better.. but i still want it to be more quiet. so im gonna get another zalman fanmate, cheap and easy to use. thinking of drilling a couple of holes in the front bottom om the case then mount a 40mm or 50mm on each side blowing air into the case...

dont know if its just my psu fan but its not quiet at all. thats why i got a replacement fan. right now my temps are 50-55 celcius... and ive had the computer running for a couple of days now.... so ill use the papst fan anyway since it got a better cfm is the psu enclosure really that...

hey i just bought an antec aria case och built a new system with it. i bought a zalman 7000 cu and it comes with a fan controller. i was thinking that i would use the fancontroller with the psu fan. and connect it to the mobo instead of inside the psu. dont worry i have a replacement fan...

hey... does anybody know an app for changing the noise level of a maxtor diamond 10 hdd?... i know there is one because i used one long ago on my old computer with a maxtor diamond 9 disk. ive just forgotten what app i used :-/ could anybody help me find what om looking for?

new m-atx mobo's with socket 775 are quite cheap and delivers quite much functionality. goes perfect with an antec aria case. i just bhought a asus p5gd1-vm motherboard for my Aria case. much cheaper than buying one of the new shuttle's wth the same features. [sata, pci-e and 3x3,5" internal...

im buying an aria chassi and i was wondering if anybody tried removing the cardreader. and then take a pair of 40mm or 50 mm fans and attach on the inside? i know there should be enough width for a pair of 50 mm... but would there be enough height? i want to avoid cutting the the plates on...