Search results

Bump for nice x1900xtx and decently priced 250GB-WD-HDD, [lol i have 20 million of the aux-power cables for that card, just wish i had that many cards to go with them. :D ] and yes nice job with the FS thread, no Techno color vison :eek:

Im looking for a Xbox dvd drive to replace the tompson drive that came with my xbox witch died on me finaly. i would like to get ethere a phillips or samsung drive for a fair price. I have a few pc games (retial not burnt), that i can part with and wilingl to trade + cash for a working...

sending pm

what are you looking for the ram? edit: pm for things you may want

the way i did it was with dividers, so i had the main cpu bus at 256=2.3Ghz and the ram at 166+46=200~

? inside the case? 29C inside case, cpu load is 30C

anyone know this modules (tccd) limit?

I had some memory that just went bad on me, Corsair XMS-512-2700C2 (PC2700) had it oced to: 166Mhz-->200Mhz 2-3-3-6,1T @ 2.8V (MEMTest86+ test 5 now shows errors even at defualt speeds from 175-345MB range) lasted for about a month and a half, then some of the memory addresses started...

I had some memory that just went bad on me, Corsair XMS-512-2700C2 had it oced to: 166Mhz-->200Mhz 2-3-3-6,1T @ 2.8V lasted for about a month and a half, then some of the memory addresses started to go bad... gonna RMA this stick...

2 ways to find that out (if its 3.0 complient) one if you have current motherboard drivers installed, you can use a application called CPUZ, then go to the Motherboard tab and look under AGP information. the much easier way is to jus know if the agp slot on the board suports 8x agp, if it...

whats the room temp? in C

nope wont work, AGP 1x/2x works off of 3.3 volt, AGP 4x/8x( and the 4 8x PRO cards that i know of) work off 1.5 volt standerds. The easy way to tell if a mb can support 4x/8x is if the MB suports agp 3.0 standards by using a program like CPUZ and checking under mainboard. If you can crack the...

I Think your right as i notice a few things that would point to this being the case, such as some programs like the ATI drivers (most if not all) detect the card as an XT, the core doesnt strugle at at at 500+ speed, and i think i saw the micron print at .130nm and not .110nm like the X800 XL...

i have a similar problem with my BBA X800XL AIW AGP card, my problem is this when i set my card to to defult speeds or higher my memory gives me instant artifaction issues, if i droop the mem down to 420 from 490 this fixes the issue. is the memory tosted or what? the CPU can go as high as 500...

can you post pics of your case (front, sides, back, and top) ^T^T^

YGPM, btw BUMP

I have a 2600+(333) with soyo KT400 MB that im selling for 100 USD. both chip and MB are in good working order PM me if you are interested, as i have offered this to some one else but they haven responed yet so its still up for grabs.

YGPM

is my memory defective? is there away to fix it?

i set the gart back to 256 as i was noticing geometry anoms. Added to the fact that it didnt resolve my white dot issue. That being when i run the card at stock speed, there are white dots that randomly apearing in games. when i lower the memory speed from 490, to about 420 they go away...

1:1 is a ratio term. In this case 1:1 means that the memory operates at the same speed of the main bus. EXP for an amd XP: CPU(166*2=333) MEM(166*2=333) this is also called Sync mode as they are working at the same communication speed . qbackin is some what correct about his statement on...

Yeah i have a limit to what I can spend (less than 300 USD) on the upgrade, and with the MSI neo 2 plat MB it seems that its one of the best OCing boards for AGP/939. I might have gone with a higher level core if there was one in a reasonable price range that was a socket 939 that had 1bm of l2...

here is a question some may find themselfs asking, (as im am sort of) "I have have 2X512 sticks of PC2700 ram, and they oc nicely to pc 3200 and maybe even pc 3500, but im looking to upgrade the amount of ram when i upgrade my cpu from a AMD 2600 XP to a Athlon 64 Vince, im aware that higher...

i may upgrade my memory, get another stick of soild 1GB of ram if i go with the upgrade, right now im seeing frame rats of about 25-70 in gta san andreas, 31-100 in farcry and other games follow. is this normal? i run most games at 1280X1024 @85 refresh. most high end games like farcry ill see...

what kinda of speed improvement would i see if i went from a 2600 XP (333) L2 256k based cpu on a soyo kt400 ultra plat board, to a vince 3000/939 pin and MSI Neo2 Plat board? correct me if im wrong but i have a x800XL AIW AGP card oced to 550/1000 and feel that im bottlenecking it with the...

any of the Zalam northbridge colors would work (tall ones) and they dont work off fan witch is even better!

@Igthorn post a shot using PCwizard 2005, if you don't know what it is, its a more indepth app for finding out system info its from the same creators of cpuZ and its better at finding settings than cpuz is. can you dl and install the app and post some pcs of your ram?

lowerd the aperture size from 256 down to 128, this fixed the dot artifacting issue as well as allowing me to run the video memory at defualt. However a new problem has come up with setting the AAS to 128 gta now suffers from spiky like texture along with triangle texure holes. any solutings or...

well im stuck with the card, let me try turning down the apg ap size, the case has been off im using omega 5.7 drives

Hi every, I have as the title says a X800XL AGP video card that seems to have an issue with the video memory, the issue is this, when the memory on the video card is ran at defualt speeds (490-500) or (980-1000 DDR) there is a artifacting in 3D applications, so i decided to go out and test the...

@Igthorn noticed it said 4mb of ram for that that one slot? btw how is the ram holding up?

PM sent

Did a search and didnt really come up with much as far as finding an answer for my current problem. If im blind please point me in the right direction. With that said here is my problem, im broke ( thats not the main problem), and i want to fix some old fans i have lying around, and the...

In most cases a heatsink is designed to have cool air blown on it to remove the hot air it producese, this is done by the fan spining and creating a downward presure. I have seen some designs that have the backwards incorperation of the fan, however i find them to be less effective and more...

I have a KINGWIN KT-424 case from King win and want to mod it some more, I say more because I cut out the fan guards as you can see best in rearview pic athttp://www.newegg.com/Product/Product.asp?Item=N82E16811170014 , and then enlarged it(rear hole) to 92mm in size from the standard 80mm...

Are you will to negotiate with the Antec Super LAN Boy II case?

thanks for your post, i like theses drivers from NGO even compaired to Omega (witch is very good in its own right) theses drivers came with ati tray tool (whats so great about that you may say) well its the only app that has been able to log and state my gpu temps and stuff. and i one other...

hi i can give you adivice on what products are good and what to stay the hell away from just ask if you want my input (very long).

see he answerd my question with out screaming at me i thank you not for your type of answer, but for the simple fact that you replied nicely and that you didn't call me any names.

i just got done taking to someone that works as WD regional manager. there rma works like this: if the drive they get back still has the info sticker on it the lable and S/N and P/N and stuff like that and the drive is in scrapable condition as far as parts. it passes and is refubed it doesnt...