DDC pump, AKA --- Swiftech MCP350 pump --- the Danger Den pump --- Corsair COOL/Nautilus500 pump.
Standard 12V/10W pumps with 3/8-inch inlet and outlet.
The pump specs and rating can still be found here: http://www.swiftnets.com/products/mcp350.asp
This is the standard flowing pump and not the ultra/plus flow. It has the BLACK impeller. To increase the flow of the pump, the Lee "RoboTech" Garbutt 1/2-inch inlet mod can be done. FYI, additional spare tops can be had for a small price of $5 to switch the pump back to the original condition. Check out this link on how to make a 10W work like an 18W pump. See the mod here: http://coolercasesuk.co.uk/showthread.php?t=10
The pumps are factory originals, never used and are not fakes from Asia. This means that the 50,000+ run hour life is still intact.
These rated pumps are ideal for cooling a single or dual-core CPUs or as a pump for a secondary cooling loop for GPUs.
This sale is only open to the lower 48 US states and large populated areas of Alaska.
Price per pump is $25 USD + shipping.
Price per spare top is $5 USD with a purchased pump.
Payment: US Postal money order (ships within 24hrs) or check (ships after check clears).
A delivery confirmation will be sent via e-mail, and kept for proof that the item was shipped.
(USPS stamped receipt of actual date via ground rate delivery.) Sooner shipping arrangements can be made via PM or e-mail.
The non-free e-mail address is bmaverickATjuno.com for all inquires and to purchase. Just replace the AT with @.
NOTICE: No group buys please. This offer must keep within the forum rules. I've had several people ask about this recently.
Standard 12V/10W pumps with 3/8-inch inlet and outlet.
The pump specs and rating can still be found here: http://www.swiftnets.com/products/mcp350.asp
This is the standard flowing pump and not the ultra/plus flow. It has the BLACK impeller. To increase the flow of the pump, the Lee "RoboTech" Garbutt 1/2-inch inlet mod can be done. FYI, additional spare tops can be had for a small price of $5 to switch the pump back to the original condition. Check out this link on how to make a 10W work like an 18W pump. See the mod here: http://coolercasesuk.co.uk/showthread.php?t=10
The pumps are factory originals, never used and are not fakes from Asia. This means that the 50,000+ run hour life is still intact.
These rated pumps are ideal for cooling a single or dual-core CPUs or as a pump for a secondary cooling loop for GPUs.
This sale is only open to the lower 48 US states and large populated areas of Alaska.
Price per pump is $25 USD + shipping.
Price per spare top is $5 USD with a purchased pump.
Payment: US Postal money order (ships within 24hrs) or check (ships after check clears).
A delivery confirmation will be sent via e-mail, and kept for proof that the item was shipped.
(USPS stamped receipt of actual date via ground rate delivery.) Sooner shipping arrangements can be made via PM or e-mail.
The non-free e-mail address is bmaverickATjuno.com for all inquires and to purchase. Just replace the AT with @.
NOTICE: No group buys please. This offer must keep within the forum rules. I've had several people ask about this recently.
Last edited: