Update :
F8 for best unlocking C2/C3's....
Wait for F10 if you want a good Core Disable Bios. F9 is buggy.
Do not exceed 269HTT bus speed in any of the Bioses .. It will lock the IDE/AHCI and drop I/o ports then Corrupt the Bios.Dosnt matter what Phenom CPU you use..It a Bios Limitation...
C3 = Nigher NB and more Stable DDr2 clocking Vs C2....Even more so vs B3...
If i was getting a chip today C3 is the only one id get for DDR2 if you plan on pushing things. Especially with 4gigs of ram or all stots filled.
Ive tried two XFX,5770,
One Saphire 5770
all three had same problem in two differnet machines...
Ups will be delivering me Two More ATI's (ASUS 5750) This will be Cards 4 and 5:rolleyes:
Im going to try Single and Xfire and see if Both sytems still do this..
My 3870x2 runs fine...
Its aKnow bug reporting wrong CCC with the 10.1 driver..
CCC ....is reporting wrong version of Catalyst Version Number for CCC.
The driver Number will be( 8.69 )for 10.1.
Thats all you need to look for in the Hardware screen after updating to Cat 10.1 driver.
Some people have...
MSI 770 C45..DDR3 .. Google it you wont be let down. 770chipset/Sb750 best ATI/Nvidia non Sli Mobo
Amazing high clocks for AMD fsb@ 385+HTT and Unlockable fun with a Modded Bios. This Mobo has super clocking features for a Single slot solution. It takes after the GD70 with less slots and...
720 unlocks to 3700mhz,,
550 unlocks too 4150mhz+ , The Chip does more im just memory limited @ this monent to run 4200mhz 24/7
A 940 is nice ,,but these 550's are well something else
Ive have a Older 720 and a nice new 550 ,, both unlock. The 550 is the best bang for the Buck ATM...
The UD3P is good for a single card platform.Has enuff Bios options to clock a Cpu well.
If your gonna use Two Graphics cards,,
UD4P/5P is alot better bang @ $109 for a 790XUD4P DDR2..if you dont want to buy ram and use existing DDR2. More Options in Bios for tweaking and ability to run two...
Rev 1 is the new revision MOBO as long as you have a REV1.0 it is the new revision.If your mobo dosnt look like the one i posted you have a older version that was still labeled Rev1 or the old UD4 ,,
UD4P.Revision 1 mobos came with F2B Bios..
As you can see F4 is the lowest you can...
M3A79-T needs the 0030Mod Bios or it wont work and wont be stable..
Asus is also working on this new Feature so you can switch ACC firmware .
M3A79-T should be getting a Bios down the Road with it,, if i remeber correct. . They already have it impelmented on many M4 mobos now with new...
Version 1.0 is actually a new revision. F5A is the Bios to run .
http://www.gigabyte.us/Support/Motherboard/BIOS_Model.aspx?ProductID=3031
F2b and F3a are bugged and F4 is the Offiacial with some options missing F5A is the Best ATM.
F5A has one small bug with the NBvid locked @...
http://www.gigabyte.us/Support/Motherboard/BIOS_Model.aspx?ProductID=3031
Scroll down F5A.
All the Mobs since last few weeks were revised before retailors recieved them. The info on the Site is the New revision.
Sata controller more ports and Giga Raid and also the DDR2 1333 bios...
I believe it will be out along with the 550BE release, which is suppose to be tomorrow the 2nd of June. I know for fact the 550BE will be released tomorrow at Launch,,
rumors have the other Lower model x4;s also, not 100% shure on the x4's but i am watching close because i want to Oc a 905e...