there could be some air in the loop ...while the system is running tilt it at all angles(not to much) and squeez the tubes a little befor and after the rad and cpu block
same board... never noticed we had the eide port lol... why not put the ide hdd and the dvd on the same cable and set them both to CS or hard drive master and dvd slave
i was curious about that 2nd port so i looked in instructions they are both ultra dma 133/100/66 ect. the one on the...
i was not happy with my 8800gts and cpu when i had a bi 120.2. i switched over to a thermochill 120.2 (about 2x as thick). i will say i use low speed fans. i would go pa 120.2 or thermochill pa 160 or with b.i. 120.3 or better for a medium speed fan setup
i think a bigger rad should drop...
on my psp i fixed one by running a program that flashed soild colors,, i ran it for a few hours... however i think the issue was different on the psp screen it was defects they just needed to break in not shure if it is similar to your pixel cause theres different kinds of stuck and broke
how many large drive bays you got?.... if you want a use a internal rad top mounted you can useually fit a 2x120 and in 1-2 of the 5.5in drive bays with rad and fans.. so 2-3 bays with one open below rad for air .. thats if you case is a standard design and your willing to cut the top for fan...
most people spend 350-$600
as for a cpu only loop with a good parts maybe $250 dtek/d5
i know thats probly not the answer you looking for, as far as it fiting in the case most people run external rads attached to the top or back so you just need to worry about the pump and the blocks inside
i have one on order when i think about it i cant live with my 20crt burning my eyes, i guess il see how it goes... from what i have read my only other option was tn based panels in the 600 price range
i would switch the tube to 7/16 tube on 1/2 barbs if you get metal barbs for your blocks,,, like some ek barbs all your fittings are still 1/2 barbs the smaller tube makes a good tight fit its just hard to get on the barb sometimes
i can wait,, just has to be ordered caus i worked out a deal with my company to get one
im going with the dell unless we find some info on the nec panel type.... if its the same or better i will try out the nec
i have to decide in less than 24hours and it has to be 1 of those 3 cause im ordering from dell with some servers i work on. ive been researching so i could use alittle help
-dell 2407hc
-Samsung SyncMaster 245BW
-nec LCD24WMCX
on dell
those are the 3 choices
its going to...
you could have air stuck in the cpu block... try squeezing gently the tubes going in and out..see if any air shoots out... new system?
i would also say tilt the rig some to each angle to get air out of rad if you havnt yet and maybe run it with the system off and the wc loop on for awile...
i have the ek it comes with the pads for the small chips and you still need goo for the bigger ones
point a few led lights at the ek also it makes it light up nice
i like the d5 pump and i like my thermochill pa-120.2 its beefy compared to bip 120.2's almost twice as thick...
i like d-tek and swifteck cpu block and i like ek gpu blocks
yate loons are nice
http://www.petrastechshop.com/
http://www.performance-pcs.com/
once you do the cpu...
i agree also.... just get good barbs from ek to replace any plastic ones
my system dost leak at all just minor loss from the normal evaperation's and suck... my swiftech mirco res the water goes down maybe 1mm every few months
also the key is not to overtighten... if you do you can...
my buddy has one made with a overhead... is ok but you cant play during the day mostly
the overhead projector style used 1 fresnel,, to focus screen to the top part. the one im building used 2 fresnels 1 on each side of the screen so one focal point is bulb the other is the projection lens...
yo first post here...
i have been reading up on 22in's here, i want one for my pc secondary, and i want it to be ps3 compatible (i already have hdmi to dvi cable)
so far i have not found any 22in that will scale 16:9 to largest possible and maintain the aspect (black bars)
is this...