1. What EFI are you using?
2. What headers do you have the Swiftech MCP35X pump attached to at the moment. Are you trying to use the EFI or Fan Expert for control of the pump.
3. The VRM fan has a couple of different profiles in the latest EFI that should help the noise level depending on the...
We did not instruct Newegg to raise their price on the cards. The $679.99 MSRP remains in effect for the card. As for the GTX1070 Strix, they are shipping in volume to the distribution channel this week and should show up next week.
Production has not been stopped, there are not any RMA issues, and the post was already verified as being incorrect based on an "ASSumption" by a store employee without any official comment or response from ASUS. ASUS EU responded to the shop and they have issued a clarification on their...
331.79 with a 750Ti, and it will resume from sleep maybe once in four times during testing. NV is readying another driver release but I do not have a date yet.
NV Linux drivers with full SST support are in process now. Please test the monitor on another system for the washed out effect. I have the same effect although not as pronounced as you state with Kubuntu. No issues on Windows or OS/X.
The MSI R9 280X Gaming 3G card does not POST on this board either. We will test the Sapphire and HIS cards upon arrival tomorrow but at this point it appears to be an issue with certain motherboard/EFI combinations as the R290/290x cards have the same issues on this board and others.
New never opened ASUS PA246Q Monitor purchased from Newegg for notebook setup but never used.
$325 Shipped to lower 48 in US only. Will toss in a new Samsung 830 128GB SSD to get this out of my way.
Paypal Preferred or Cashiers Check.
Sale Pending...
The final prize list from us was not published. It will be updated today and remember we awarded over $3500 at the last event not including all the swag. ;)
VG278H -
1. We apologize for any troubles that users might have experienced with this monitor.
2. We offer APR and new replacement monitors for users in North America.
3. If you are having trouble with the monitor and are in the US or Canada, please send us email at mason_winner at asus.com...
1. We offer APR service on this monitor and it will be replaced with a new monitor, not repaired. If a retailer or service is telling you any differently then please contact me.
They were newer chips. This whole conversation about current ES chips being worse than what will be released at retail is, ummm, how should I say this, wrong.
We will have a new EFI out that improves unlocking abilities on the older Phenom II dual cores. It will be based on the latest CVF code that matches previous 8xx series capabilities. AMD made some major changes in the last AGESA code that more or less reduced your chances of unlocking those...
Can you please PM us so we can provide you our email addresses for those screenshots. We have no problems running your specified memory in either 8GB or 16GB configurations and GSkill confirmed no problems with the 0506 or 0027 EFI releases with these same kits this morning. We have provided...
Now Dan, everyone knows you get the hardware months in advance, err, maybe sometimes it is minutes in advance but that is what the separates the living from the dead. :D For everyone else, very true words here. ;)
I cannot really go into any product details or benchmark scores, but let's say I was back to writing reviews. What would I hypothetically focus on in a BD review centered on gaming capabilities.
1. Dual or Tri SLI/CF with mid-range to high-end cards - 1920/2560
2. High/Max game settings...
Please update to EFI 1606 - ftp://ftp.asus.com.tw/pub/ASUS/mb/LGA1155/P8P67_PRO/P8P67-PRO-ASUS-1606.zip and enable Hotplug for the SSD and HD ports.
Intel is working on an updated RST driver set that will have improved compatibility with the latest SSD drives. We might have you uninstall...
Change your SSD drive properties to Hot Plug in EFI, it usually solves an LPM problem with early firmware revisions on SSDs, especially the Marvell and SandForce controllers.
If you are overclocking with Internal PLL Voltage on auto, it will normally enable this feature once you are past a 44x multiplier or have set Bclk past 103. Once this is enabled, most sleep/hibernate routines will not work properly, this is internal to the processor although Intel is working...
Update - We have isolated the Microsoft 3.1 receiver problem down to specific lots from MS, especially those sold in HP systems or from their store. Long story short, we are working with MS on what is causing the drift problem in these particular kits but should have resolution in the near future.
Update - Our customer care site and details of the replacement plan will be up today. Although, under NDA on actual details and launch dates, I do not know why there is such excitement for the Z68 chipset when basically it is H67 with overclocking capabilities (i.e., P67 with video out...
Update -
We setup five stations to try to replicate this problem and so far all machines have over 100 hours on them without a problem, this includes multiple sleep routines, benchmarks, network transfers, etc before just letting them sit and run. We have not rebooted the stations yet.
So I...
Update- I am trying to secure a 3.1 receiver and Microsoft is doing the same. We will get this fixed, so far all reports of drifting come from either the 3.0 or 3.1 receiver.
The Sabertooth series has a fiver year warranty but the rest of our current and recent board series has a 3-year warranty. Where did you get the one-year warranty information from on your board.
I have not noticed tons of BIOS issues on this product and if you mean flawed due to the P67 chipset recall, then fine but otherwise the product is not flawed.
Update -
We (along with everyone else) were notified of this problem today after Intel decided to announce this recall and replacement late last night. In the meantime, we will continue to offer full support for our P67/H67 motherboards.