Search results

Everything seems geared to Intel now, what is the best DDR3 for AMD cpus like the 8350? I just switched from a 965/DDR2 to a 8350/DDR3 and it is slower, because the DDR2 could handle 250Mhz bus speed with tight timing, and the DDR3 ... both GSkill ... starts to choke over 220Mhz. Seems...

I have a new Gigabyte GA-890GPA-UD3H with the latest F4 bios in it. I also have two Intel SSDSA2MH080G2R5 the 80G G2 disks. The Sata3 controllers see the SSD's in IDE mode. In AHCI more they don't. In Raid mode the raid bios also does not see the disks. The onboard sata2 controller sees...

Much to my disappointment, turns out the IR remote, though it says it is Media Center compatible, it isn't....sort of. The IR device lets the remote operate Media Center but the IR blaster part of the device is not recognized. So it tosses a monkeywrench into the whole setting up for a...

Anyone know if there is a best way to setup a Raid 0? I have the bios setup so Sata0-3 are raid-able and 4-5 are "IDE" for Bluray drive. My biggest question is does it matter if you use 0-1 or 0, 2 for a Raid0 pairing? On the Nvidia chipsets, there are disparate controller pairs in the...

I have a 2nd drive that I put the pagefile on, seperate drive, seperate controller, and I want to delete pagefile.sys off my C: drive (short stroked velociraptor raid 0) because between the pagefile and hyberfil file they were sucking down 16GB of prime speed real estate. But the system won't...

A freinds laptop has this dialog box that keeps repeating infinitely and using 99% of the machines time... "ERROR C:\USERS\x\AppData\Roaming\xxxx.dll" Over and over, and I can't figure out how to stop it, or what's causing it. Anyone run into this?

Anyone run across this issue? I have a WRT54GS rev 3, and ever since my neice got a iPod Touch, if she uses it on a visit, it can cause the Linksys router to freeze up. I have to cycle power on it to get it working again. Weird, but hopefully some setting could make it stop happening?

Been getting driven nuts by "Wireless Zero Config" service. Constantly "re-finding" the network. I have two wireless routers in the house, and it stops, says ooo whatsh this about the other one, then reconnects to where I put it in the first place. Anyway to get it to stop? I tried turning...

Anyone having trouble getting into Hotmail lately? Not sure this is an OS thing, but I'm not getting through as outlook express or from the web.

I'm having an issue trying to use an X850XT with a Samsung 52" HDTV. I could have sworn it worked but after doing a clean install using the latest drivers the TV just says "mode not supported". I'm using a DVI-to-HDMI cable, which works fine on another computer with a X1900XT, so the TV and...

has anyone found a maker including an HDMI adapter and implementing the HDMI audio pass-thru that is in the reference design? There would be a 2pin connector next to the SLI header to connect to your motherboard's SPDIF to pass your systems digital audio through the DVI/HDMI adapter to a HD TV...

I have cookies set to PROMPT me so I can pick and choose what sites and cookies are allowed. Using this, Windows builds a database of "sites". I want to do a re-install of XPpro and rather than go through the process all over again, I'd like to find where this is stored and move a copy to the...

I have a kit of GSkill good stuff, the F2-6400PHU2-2GBHZ kit based on D9GMH chips. They do 270Mhz (540 Mhz aka 1080) on my Foxconn C51 board. I also have OCZ 1066SLI sticks that do 10Mhz higher, so Im staying with the OCZ. So Im selling my HZ's. Great ram, only used for 2 weeks, bought from...

I am selling my A64 setup: http://i189.photobucket.com/albums/z131/Jack_Carver/PICT0442.jpg DFI NF4SLI-DR with all the bells, only thing missing from packaging is the IDE/floppy cables... I decided to keep them. Some extra heatsinks on mosfets and AS3 on NB cooler and core. Opteron 165...

Where's the best place to find info on NF590 boards, OCing, etc? I have links to a good 50 forums and there is squat for info out there.... am I missing something? My new Foxconn 590SLI with 5600+ is doing memtest on stock non-heatpipe AIR @ 3.5Ghz 1.375V and 250Mhz on the 2GB of OCZ "D9"...

I am looking for a stock HSF for an Opteron 165,etc. Willing to pay $20 for it. Somebody out there has one, yes/no? contact Jim, [email protected]

Need to replace one in my neice/nephew's computer, thiers blow up. Looking to pay around $50ish? please PM me if you have one available.

I know I should ask in the Forsale/wanted, but not likely to find anyone cruising there that can help me. Also, anyone have the mod's for Vcore bump and Barton pin mods? I had them and lost the files. I need to replace a dead on in my little neice/nephew's computer I setup for them years ago...

Anyone ever seen or heard fo these files? Just ran Rootkit revealer, as I do once in a while, and this time it found the follwing: C:\WINDOWS\Prefetch\CMD.EXE-137A0D53.pf 10.81KB Hidden from Windows API C:\WINDOWS\Prefetch\XPN.XEX-050903EF.pf 38.75KB Hidden from Windows API...

I have a X850XT with the ArtciSilencer installed. Very quiet, I run it at 550/550, core temp max's at 54C. Have not voltmod'd the board, it will go much faster if mod'd. I switched to X1900XT, so Im selling this board off. $250 plus shipping of buyer's choice. Jim_Bot over at Comcast d net...

I installed XPpro on a new Foxconn NForce4 6150 motherboard, and the IEEE1394 driver didnt install. Can anyone tell me WHERE to find it on the Windows CD, or in windows directory of a working install? Just plain weird, but whaddaya gonna do.

I mistakenly used Regcleaner on a dual core install. next thing I know System Restore is no longer available. Brand new XPpro install. Error message pops up claiming "sysdm.cpl" is missing. Any ideas? Can I get this back without having to reinstall AGAIN? Every tab on "system" control...

Is regcleaner compatible with A64, esp dual core opterons? I tried to use it and it acts real weird, there is an entry in task manager but ther application never shows up when you doubleclick it. I tried uninstalling/reinstalling, no help. Ideas?

Just want to point out, for the record, that I was correct in asserting there is NO TECHNICAL reason why CFire cant be done over the PCIe bus....other than x8 x8 SLI connections couldn't handle the bandwidth. But x16 x16 boards can, and the new R550 chipset implements x16 x8 fully to allow...

Hoping one of your water cooling guys will part with a stock AMD heatpipe Opteron heatsink, I got a OEM 165, forgot to get a HSF.... oops. Open the bidding at $10+shipping? Contact at "Jim_Bot" _at_ comcast.net

Does anyone know if you can mix/match DLink XtremeG with Linksys SuperG and still get the 108Mbps functionality? I have the Linksys WRT54GS router, and want to use the DLink XtremeG USB adapter (which is on sale this week). I use the Airplus DLink adapter currently, works fine but need a...

Any idea how to tell OExpress to not compact and leave my email as is. I have a bazillion Gigs of disk space?

On new NF4 motherboards, using the SATA raid array, you end up with WinXPpro (assume all others too) putting the usual "Eject this device" iconin the taskbar notification area. Just like with a USB thumbdrive. Only this is...how BAD it would be for you to "eject" 1/2 of the raid0 array by...