I just tried this myself at 2560x1440
2600k @ 4.3
7970 @ 1200core/1700memory
here are my settings
frame rate dropped down to 37, with quick random dips to 35
Just wanted to chime in with my 27" that I got today.
Im loving the resolution
this is using the camera settings from an earlier post 1sec/f2.8/100iso
Top right really ain't noticeable in normal use, and also is dependent on how I'm sitting at the time.
The right monitor is my 4-5...
well somewhat of an update.
I found out how to enable both at once. I had to disable the Realtek Lan and enable the Marvell Yukon within the bios.
So heres my new problem
Using the "Asus wifi ap solo" program I have it set as an access point. On my psp I can connect to the access...
basically I want both, wired and wireless on at the same time, which doesn't seem to work.
1-before I had the router I used my dual onboard lan for the other computer.
2- I don't really want to spend much as the wireless would only be for the psp
2-2-Its an antenna that plugs right into the...
So i just got myself a new PSP slim and im trying to setup a wireless connection for it. I just have a regular wired connection.
Im trying to use the built in wifi on my P5k to use with my PSP, but I can only have one connected at a time
ex. if I enable the wired connection the psp wont...
glad to know im not the only one with this problem atleast.
but on topic, I went and got a Big Typhoon yesterday, and can install it within the next few days. After i remove the IHS that is.
right now im clocked at 2.15ghz and undervolted at 1.3375v in the bios, now even with these lower volts core 2 is reaching ~56c under dual prime. When i up the volts to 1.375 @ 2.6ghz core 2 will reach ~65c :eek:
heat issue
what would you suggest to use as shims
So I think I've narrowed my heat problem down to the IHS, since everything else I have tried basically has no results.
My question though is, using the arctic freezer 64 pro, how much much pressure might there be on the core? Also how well would the hsf stay in contact with the core, due to...
So I went and lapped these today, opty and AF64, but the temps are still the same so far:(
The opty is down to copper. I used 240>400>600 grit sandpaper, 600 was the highest I could find with the time I had today.
Im sure after all that the temps should have gone down a little bit even...
I'm starting to think that my IHS may be a bit concave. Ive tried a few things that seem flat and the IHS seems to be low in the same places with each thing I tried. Plus with the 3-4 reseats Ive tried I'm positive at least one of them should have worked properly.
I dont really know if I...
case
I really dont like how the pci-e and the cpu cables are sleeved together for about half the cable length. The main power cable is just too stiff to really get out of the way
my 'ghetto' mod
Im using an Arctic Freezer 64 Pro on my Opty 170. Im currently at 2.5Ghz @ 1.375v according to the bios. I have remounted the heatsink 3 times already.
I know that the temps will lower slighty after the AS5 sets up but nothing to amazing.
Ive added an 80mm fan onto the heatsink, pulling the...
Anyone else have anything to say about the blacks :confused: I dont think mine should be this dark. Could it possibly be my DVI cable that came with the monitor?
My Samsung is running on a vga cable and while the colors aren't that great I can see way more in the dark areas
is anyone else have problems with dark areas in games and such? playing bf2 when i go inside a dark building its almost impossible to see anything :( Even my samsung 940b shows these areas way better.
all you guys talking about it being $900 sum :eek: i got it for $868 with 5% off plus...