I also had a unique situation. Not sure if you guys use dual monitors but I did. My cursor would dissapear on the primary monitor but if I moved it to the secondary montor it would appear and act normal. My primary was the DVI port and my secondary was analog vga.
I have the same problem. I have a pair of leadtek 6600 gt's. I finally got fed up with it and havn't done sli since. I have been meaning to try it again though and see if it has been fixed with a driver update.
I think that it is a more realistic game than the last 3 or 4 years. I usually can take any team to the superbowl right out of the box but with '07 I havn't been able to do it. I still am struggling with it. Not as good at playing it as the last 3 years.
The manual was a joke especially...
A lot of people have been complaining how hat they get. I know there are few guys over at xtremesystems that are putting aftermarket coolers on them. So people say they got better overclocks with an aftermarket cooler some not. I pulled the heatsink off mine and replaced it with AS5 and will...
Here is an explanation taken from www.hardcoreware.net/
The "S" is the 'series' of course, and the number beside the 'S' represents how many "S's" that board supports. The first two "S's" are nothing new; they refer to Gigabyte's software and driver installation, BIOS recovery, etc. The last...
1. I would use a motherboard tray from an old PC to be safe. Plus it would make it a whole lot easier.
2. I wouldn't cut those holes I would make 2 seperate chambers. One for HD optical drives and power supply. The second on to hold your motherboard. That way you are not heating up your...
I am upgrading my watercooler setup. I have a swiftech apogee that will be cooling a pentium 965 extreme edition. Also in my loop I will have a swiftech mcw55 cooling my 6600gt and will probably have a second one in there soon.. My pump is the swiftech mcp350. I was wondering which radiator...
What I have:
Gigabyte GA-8n-sli Royal
2 GB Corsair XMS2 memory
Intel 840 exteme edition
2X Leadtek Geforce 6600GT PX6600GT TDH
OCZ powerstream 520 powersupply
with the latest bios for the board
When I reboot my PC it hangs on the BIOS screen. The screen with "Hit del to enter setup..."...
1/4 in is the stock tubing and the tubing you will have to use if you are going to use the pump and blocks. I upgraded my tubing and fittings from McMaster carr but don't remember the thread size. It is 1/8 in. How I figured it out was went to Home Depot and bought the thread I thought it was...
I got in on the B.O.C. My second purchase from woot this week. I check it every noght people think I am crazy but they get good deals every now and then.
I heard someone talking of another site that does one deal a day like Woot. Anyone know a name of the site?
I guess I can retract my original statement of the board. My corsair memory is supposed to run at 1.9v and the board defaulted to 1.8v. Increased the voltage to 1.9 and have had no issues since.
The Asus P5WD2 premium is generally regarded as the best of the intel boards. I wished I would have bought that one as apposed to the board I really got.
I have the same board as Formula383 but with an 840 extreme edition and when I first got it would not post either. Finally i found out it was one of the external USB ports as soon as I disconnected it it would finally boot. Now I am getting blue screens left and right. Have tried different...
My pump died on my bigwater so I am upgrading it now. Bought a Swiftech MCP350 to replace the dead one and bought 3/8 inch tubing still waiting on my new proc. will let you know when I upgrade.
I was wondering if A. Any confirmation if they are 1/8" BSP fittings (the email I got from Sharka sounded like they were unsure." I would hate to order them and have them be the wrong fittings. B. If there were anyplace I can get the right fitting.
I wasn't sure if Sharka had them or not...
I have a Thermaltake Bigwater in which the pump died and I bought a new pump with 3/8" id fittings. I was wondering if anyone knew of a place to get the replacement fitting for the block. I know I can get adapters that will convert 1/4" to 3/8" but that kind of defeats the purpose.
Sharka...
Well went to work on my cooler today and noticed my pc was off. Rebooted it and it instantly alarmed and shut down. Pulled off the cover and looked at the pump and noticed it was not pumping.
Anybody recomend a small pump with 1/4 fittings as a replacement?
Well the temps are back up again. I will double check the tubing again. I have the radiator on the outside with the fan pulling through. I will probably reverse it and see how that goes.
So as of right now I am running at 64 idle. Yesterday withought doing anything to it it was running at...
I think 3/8 would be fine but if you can you might as well go 1/2. Just my 2 cents.
BTW I just got this kit about a month ago and been having issues with it running about 145 degrees (Ferenheit of course) Idle with an ambiet of about 74. Havn't had much time to work on it the last couple of...
The Thermaltake bigwater has a blue led on it. It does not have a sensor though. xoxide has it for $53. You might be able to find it cheaper I didn't look very hard. The par number is CL-W0010.
I was wondering why there is always some guy standing in the corner of computer room watching me. :D There are a lot of unloscked processors out there. Last year Intel gave out 1 unlocked chip to pretty much all the workers in Oregon. I have 2 of them as far as engineering samples. I have...