Well ill keep it short ive been testing this Mobo over the Weekend , its the new Revison and comes with the F2B bios stock .It will run and boot most chips including a 720 with this Bios. I highly recomend flashing to F5A before you do anything else. It offers best performance ATM and unlockin...
:mad: Ok as the topic says i have two New 55nm Nvidia EVGA brand videocards...If GPU-Z is correct it says thier both made in 2007 and are 65nm...!!!!!!!
I dont know what EVGA is doing with the 9800GT55nm...I feel like the biggest Idiot,, seeing , i had just returned two perfectly good...
Ok after several weeks of my temps on core two slowly going up on a stock 3870x2 i found that the heat sink was seperating..
I know for fact the 4870x2 uses two simalar copper sinks like the 3870x2 . The studs that are factory pressed into the Sink slowly pulled out of the COPPER on my...
Well ive been tweaking the TA770 and decided to bite on anew 9950BE...
This chips are sweeeeeet...
Not every chip is expected to clock good . I know my 9600BE was horrid @2500mhz but it still performed...
All i can say is wow for these new chips..
First boot 3.3ghz and then i said...
Ok ive been waiting for this and it works :D
You will flash a Master bios first then a Slave bios....
Visiontek Driver forum..
http://www.visiontek.com/forum/viewtopic.php?f=3&t=3837
I have not had time do bench any games....3Dmark06 has gained some points from less...
This says it all. Ive been waiting for B3 ....Definatly a Wolf in sheepskin:D
http://www.xtremesystems.org/forums/showthread.php?t=183025 Also ther are many other 9850's going over 3.0ghz..Tony and others are overclocking and testing the chips as fast as they come in Hahahaa.....Its night and...
Yup ,, I know AMD Phenom is chip like no other..The thing that really holds Phenom back More than the Chip its self is "Vendors with crummy Bioses"..
After testing over 100 bioses (uninstalling and reinstalling More than 30 different Bioses 5times each)
There is plenty of performance to...
Running 9500 stock or slightly overclocked is still good....@$200.00 but 9600BE is the bomb!
The new BE's are hitting the shevles and go up to a x20multi...and are going for $275-$280
The 9600BE is launching today. You need to ask or look for these part numbers - OEM Tray = HD960ZWCJ4BGD...
I just hope this dosnt affect my new GTS512! Now i know ill be stepping up in Febuary.....Or ill order a problem free 640SSC!
http://www.geforce9.com/index.php?news=133 By the way this is only one site of many that report the failures and ther even happening to GTS512mb now tooo!
1st http://techreport.com/discussions.x/13756
2nd http://www.macnn.com/articles/06/01/23/core.duo.errors/
3rd http://tweakers.net/reviews/740/all/chip-magicians-at-work-patching-at-45nm.html
Wow a few weeks back i was only joking about Intel and errata....
Like AMD ,,Intel now has a...
8800GTS/GTX/Ultra.......Thermal Paste MX-2 MOD......90cfm or 120cfm Fan MOD........Also a nice Lap and polish job for watercooling like Temps and performance on :D AIRCOOLING:D
All of us know how bad the stock cooling is on the 8800GTS/GTX/ULTRA . We also know that these cards have great...
Stepping is higher than what ive seen on the 6400+ if im correct. My new 6000+is
CCB8F-0728GPMW
Ok 6000+ screenie @stock for Burn in! I will be shaving the IHS and overclocking it to the hilt on my water set up . Im just making shure its 100% buned in and stable before i Crank on it...
Fry's lowered price was $240 last week!
FreeShipping Too and i called on some batch #s lots of CCB8F-0720XPMW can clock over 3.4 -3.5 on air and even better with water!
These are the Best of 90mn ! When ordering if you call , Ask that thier tech or the person who fills the Order to make...
I love my BfgTech 8800GTS A3 320mb , I heard rumors that the A3 chips were comming out in full force , all i can say is PRICELESS>>>>>>>>>>>>>>>>>>>>>>>for only $299.00 . L@@k @T my Oc WHO NEEDS A ULTRA when a 320GTS can do this:D the Card can go even Higher but i wanna take it lil slow..My 2...
Well last night i tried to unlid my 5600+ I H S seeing that ive run several CPU's with out one , Mine was soldered and I didnt have a clue that AMD was doing this to the CZ's till it was too late!
Well i put my back up CPU in which happens to be a Orleans 3200+ 2.0ghz stock. A while back i...
I learned the hard way.:mad: Ive always removed the IHS for better cooling untill today! I was happy my 5600+ could do up to 3.5Ghz but needed better cooling so i was temted to remove I H S after lapping it and only got upto 3.4Ghz stable:D So i preceded with next best thing , to go on a...
Ok ive now put my 5600+ on a ASUS M2N32 Wifi DeluxE..So far it looks good until i get my FSB to 305mhz or above . Seems that my Cpu @3.3ghz and FSB 305mhz wont let me go further. On Air my Idle is 30c and load is 51c both cores 100%with a room temp of . if i give it more Vcore above 1.45vcore i...
I had a problem with my X2 5600+ @3.1ghz. While i was overclocking i couldnt figure out why my DDR2 6400 which ran @1000Mhz in the same mobo wouldnt run @1000Mhz anymore after changing the 3200Orleans to the 5600CZ. I found some very helpfull info from a Cpu/divider chart i found on the net...
Ok i can run my 5600+@ 3.1Ghz and FSB 222Mhz stable with memory @ 1:1 divider with 4xHt .So here is the problem my Patriot 6400ELK 2.2v was @1000Mhz 5 5 4 6 with a Am2 Orleans3200+ @2.53Ghz and 250Fsb on this same board .It used a 5/Fsb divider in Cpu Z. With the 5600+ the same mem wont do more...
Ok when i get my X2 this weekend, can i set One core to utilize my (Os )while i Use the Other Core too Run a Game .Or is it One Core Runs everything while Gaming only?....Im not shure how to set my chip up and i want to take full advantage of my Os X64bit XP Pro and Gaming on a X2! :confused:
Ik hears the Deal i have to choose between a Bris 2.5 or a Win2.6 both have G1 DDstepping 65watt core ......The 4800x2 $130 The 5000x2 $160....
I will be running one of these on the Sig system @ 240 or 250 FSB i can go as high as 280 but want to keep system no Higher than 240-250FSB...
Well after looking ,searching and more looking,I couldnt get any 160.03 drivers for X64 XP Pro...Guru only has em for XP32bit and Vista 32/64bit.....So i bit the Bullet and Loaded the Beta 160.02 Nvidia Qaudro Driver ....It works Great!!! But no Fan Control Either!!!! For the most part it plays...
Ok i keep seeing how peoples 8800 series cards have gained 100 to 200 3dmark points buy changing driver from 158.22 to 160.03 under Windows Xp Pro32bit ......Do they have this same driver for X64bit Xp Pro ?
Ive found one for( Quadro Beta 160.03 x64bitXp ) @Nvidia .com ,is this the one that...
Ok my card clocks real well on the Gpu @ 648 hz and @ 1512hz shader but heres the trick the memory just wont pass 1650 hz =828 mem clock no matter if i use ATitool or RivaTuner!
I really dont want to do a (bios flash mod )but if i had to does anyone know if the 640 bios have a higher Voltage...
To make this short ,ive read that the shader clock can be raised via a bios flash, but with out flashing it could( not )be raised...Then ive also read that when you raise your Gpu clock ,the shader clock will increase with the Gpu clock ,...Is this true or can you only flash it? Cuz i know nTune...
ok i took my stock 8600GTS Evga n761 non superclocked and ran ATitools . The highest Clock with stock Memmory was 768mhz with 76ctemp load.....The highest memmory clock with stock GPUclock was 1151 = 2.3ghz no artifacts.. So i decided to run my final clock speeds as per ATItool Screenshot which...
Ok i used to use Coolbits with my7950 512mb Ko in X64 XP pro...I now want to overclock my 8600GTS just to see what else it can do! But you cant use Coolbits anymore with the 8600series and ntune seems not to work good with Overclocked MSI motherboard.ANY OTHER OPTIONS I COULD TRY? Thanks for...
:cool: Ok heres the deal ...I had $275.00 store credit at Fry's OUTPOST.com ...I wanted a Evga 8800GTS320 but theyve been outa stock for two weeks now,So i purchased a Evga 7950 512ko for $250manager special last week..
Today I drove 45minutes to my nearest Fry's and talked to the manager...
Well a few days ago i was given a( MSI K9N Neo 550 )with a AM2 90nm 3200+2.0ghz Orleans Cpu for free from a friend who decided to go with a (MSI K9N Neo 570 platinum) and 90nm 3800+Orleans2.4ghz . Well heres the cool stuff !!1st im at 2.4ghz on the 550 running my Patriot DDR2 6400 @1000mhz at...